As confidentially submitted to the Securities and Exchange Commission on February 18, 2020, as Amendment No. 3 to the confidential submission. This draft registration statement has not been publicly filed with the Securities and Exchange Commission and all information herein remains strictly confidential.
Registration No. 333-
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
THE SECURITIES ACT OF 1933
NANO-X IMAGING LTD
(Exact Name of Registrant as Specified in its Charter)
State of Israel
(State or Other Jurisdiction of
Incorporation or Organization)
(Primary Standard Industrial
Classification Code Number)
(I.R.S. Employer Identification No. )
Neve Ilan, Israel 9085000
+972 02 995 0506
(Address, including zip code, and telephone number, including
area code, of Registrant’s principal executive offices)
CT Corporation System
28 Liberty Street
New York, NY 10005
(Name, address, including zip code, and telephone number, including area code, of agent for service)
Andrea L. Nicolás
Skadden, Arps, Slate, Meagher &
Four Times Square
New York, New York 10036
Amit, Pollak, Matalon & Co.
APM House, 18 Raoul
Building D, 6th Floor
Tel Aviv 6971915, Israel
Peter N. Handrinos
Wesley C. Holmes
Michael E. Sullivan
Latham & Watkins LLP
200 Clarendon Street
Boston, Massachusetts 02116
Gornitzky & Co.
45 Rothschild Blvd.
Tel Aviv 6578403, Israel
Approximate date of commencement of proposed sale to the public: As soon as practicable after effectiveness of this registration statement.
If any of the securities being registered on this Form are to be offered on a delayed or continuous basis pursuant to Rule 415 under the Securities Act of 1933, check the following box. o
If this Form is filed to register additional securities for an offering pursuant to Rule 462(b) under the Securities Act, check the following box and list the Securities Act registration statement number of the earlier effective registration statement for the same offering. o
If this Form is a post-effective amendment filed pursuant to Rule 462(c) under the Securities Act, check the following box and list the Securities Act registration statement number of the earlier effective registration statement for the same offering. o
If this Form is a post-effective amendment filed pursuant to Rule 462(d) under the Securities Act, check the following box and list the Securities Act registration statement number of the earlier effective registration statement for the same offering. o
Indicate by check mark whether the registrant is an emerging growth company as defined in Rule 405 of the Securities Act of 1933.
Emerging growth company ☒
If an emerging growth company that prepares its financial statements in accordance with U.S. GAAP, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 7(a)(2)(B) of the Securities Act. ☒
† The term new or revised financial accounting standard refers to any update issued by the Financial Accounting Standards Board to its Accounting Standards Codification after April 5, 2012.
CALCULATION OF REGISTRATION FEE
Title of each Class of Securities to be Registered
Aggregate Offering Price(1)(2)
Ordinary shares, par value NIS 0.01 per share
|(1)||Estimated solely for the purpose of calculating the registration fee pursuant to Rule 457(o) under the Securities Act of 1933, as amended (the Securities Act).|
|(2)||Includes ordinary shares that the underwriters may purchase pursuant to their option to purchase additional ordinary shares.|
|(3)||Calculated pursuant to Rule 457(o) under the Securities Act based on an estimate of the proposed maximum aggregate offering price.|
The registrant hereby amends this registration statement on such date or dates as may be necessary to delay its effective date until the registrant shall file a further amendment which specifically states that this registration statement shall thereafter become effective in accordance with Section 8(a) of the Securities Act of 1933 or until the registration statement shall become effective on such date as the Securities and Exchange Commission acting pursuant to said Section 8(a), may determine.
Information contained herein is subject to completion or amendment. A registration statement relating to these securities has been filed with the Securities and Exchange Commission. These securities may not be sold nor may offers to buy be accepted prior to the time the registration statement becomes effective. This prospectus shall not constitute an offer to sell or the solicitation of an offer to buy nor shall there be any sale of these securities in any State in which such offer, solicitation or sale would be unlawful prior to registration or qualification under the securities laws of any such State.
SUBJECT TO COMPLETION DATED , 2020
NANO-X IMAGING LTD
This is an initial public offering of ordinary shares of NANO-X IMAGING LTD.
No public market currently exists for our ordinary shares. The initial public offering price is expected to be between $ and $ per ordinary share.
We intend to apply to list our ordinary shares on The Nasdaq Capital Market under the symbol “NNOX.”
We are an emerging growth company, as defined in the Jumpstart Our Business Startups Act of 2012 and will be subject to reduced public company reporting requirements. See Prospectus Summary—Implications of Being an Emerging Growth Company and a Foreign Private Issuer.
Investing in our ordinary shares involves a high degree of risk. See Risk Factors beginning on page 10 of this prospectus for a discussion of information that should be considered in connection with an investment in our ordinary shares.
Neither the Securities and Exchange Commission nor any state securities commission has approved or disapproved of these securities or determined if this prospectus is truthful or complete. Any representation to the contrary is a criminal offense.
Initial public offering price
Underwriting discounts and commissions(1)
Proceeds to us (before expenses)
|(1)||Refer to Underwriting for additional information regarding underwriting compensation.|
We have granted a 30-day option to the underwriters to purchase up to additional ordinary shares solely to cover over-allotments, if any. The underwriters expect to deliver the shares to purchasers in the offering on or about , 2020.
TABLE OF CONTENTS
Through and including , 2020 (the 25th day after the date of this prospectus), all dealers effecting transactions in these securities, whether or not participating in this offering, may be required to deliver a prospectus. This is in addition to a dealers obligation to deliver a prospectus when acting as an underwriter and with respect to an unsold allotment or subscription.
You should rely only on the information contained in this prospectus and any related free-writing prospectus that we authorize to be distributed to you. We have not authorized any person, including any underwriter, to provide you with information different from that contained in this prospectus or any related free-writing prospectus that we authorize to be distributed to you. This prospectus is not an offer to sell, nor is it seeking an offer to buy, our ordinary shares in any state or jurisdiction where such offer or sale is not permitted. The information in this prospectus speaks only as of the date of this prospectus unless the information specifically indicates that another date applies, regardless of the time of delivery of this prospectus or of any sale of the ordinary shares offered hereby. Our business, financial condition, results of operations, and prospects may have changed since that date. We do not take any responsibility for, nor do we provide any assurance as to the reliability of, any information other than the information in this prospectus and any free writing prospectus prepared by us or on our behalf. Neither the delivery of this prospectus nor the sale of our ordinary shares means that information contained in this prospectus is correct after the date of this prospectus.
You may lose all of your investment in our ordinary shares. If you are uncertain as to our business and operations or you are not prepared to lose all of your investment in our ordinary shares, we strongly urge you not to purchase any of our ordinary shares. We recommend that you consult legal, financial, tax and other professional advisors or experts for further guidance before participating in the offering of our ordinary shares as further detailed in this prospectus.
We do not recommend that you purchase our ordinary shares unless you have prior experience with investments in capital markets, and basic knowledge of the healthcare and medical imaging industry, and unless you have received independent professional advice.
This prospectus includes statistics and other data relating to markets, market sizes and other industry data pertaining to our business that we have obtained from industry publications and surveys and other information available to us. Industry publications and surveys generally state that the information contained therein has been obtained from sources believed to be reliable. We have not independently verified any of the data from third-party sources nor have we ascertained the underlying economic assumptions relied upon therein. Market data and statistics are inherently predictive and speculative and are not necessarily reflective of actual market conditions. Such statistics are based on market research, which itself is based on sampling and subjective judgments by both the researchers and the respondents, including judgments about what types of products and transactions should be included in the relevant market. In addition, the value of comparisons of statistics for different markets is limited by many factors, including that (i) the markets are defined differently, (ii) the underlying information was gathered by different methods, and (iii) different assumptions were applied in compiling the data. Accordingly, the market statistics included in this prospectus should be viewed with caution. We believe that information from these industry publications included in this prospectus is reliable.
Solely for convenience, the trademarks, service marks, and trade names referred to in this prospectus are without the ® and ™ symbols, but such references are not intended to indicate, in any way, that we will not assert, to the fullest extent under applicable law, our rights or the rights of the applicable licensors to these trademarks, service marks and trade names. This prospectus contains additional trademarks, service marks and trade names of others, which are the property of their respective owners. We do not intend our use or display of other companies trademarks, service marks or trade names to imply a relationship with, or endorsement or sponsorship of us by, any other companies.
Basis of Presentation
We were incorporated under the laws of the State of Israel under the name NANO-X IMAGING LTD on December 20, 2018. We commenced our operations on September 3, 2019. Substantially all of our assets were acquired or assigned (the Asset Purchase) from our predecessor company, Nanox Imaging PLC (Nanox Gibraltar), a Gibraltar public company, pursuant to an asset purchase agreement (the Asset Purchase Agreement), dated as of September 3, 2019 and as amended on December 3, 2019 and December 31, 2019, between Nanox Gibraltar and us.
As of September 3, 2019, we and Nanox Gibraltar had the same shareholders and therefore the transaction was treated as a transaction under common control for accounting purposes. For periods and at dates prior to the
Asset Purchase, the financial statements included in this prospectus were prepared based on the historical financial statements of Nanox Gibraltar, which were adjusted to reflect (a) only the net assets that were transferred in the transaction according to the Asset Purchase Agreement, (b) that no interests of Nanox Japan, Inc., a wholly owned subsidiary of Nanox Gibraltar (Nanox Japan (predecessor)) were transferred under the Asset Purchase, and the fact that the consolidated statement of operations at Nano-X Imaging Ltd includes the costs incurred for services provided by Nanox Japan (predecessor) to Nanox Gibraltar (c) the consideration in the Asset Purchase as if it was recorded at the beginning of the earliest period presented, against a decrease in the shareholders equity, and (d) all of the share-related information as the share information of Nano-X Imaging Ltd.
Unless derived from our financial statements or otherwise noted, the terms shekels and NIS refer to New Israeli Shekels, the lawful currency of the State of Israel, the terms dollar or $ refer to U.S. dollars, the lawful currency of the United States, and Yen refers to Japanese Yen, the lawful currency of Japan.
We are subject to various risks that may materially harm our business, financial condition, results of operations and prospects. An investment in our ordinary shares is speculative and involves a high degree of risk. In evaluating an investment, and before deciding whether to invest, in our ordinary shares, you should carefully consider the risks and uncertainties described below, together with all the other information included in this prospectus, including our consolidated financial statements and the related notes included elsewhere in this prospectus and Managements Discussion and Analysis of Financial Condition and Results of Operations.
If any of the events described in the following risk factors actually occurs, or if additional risks and uncertainties that are not presently known to us or that we currently deem immaterial later materialize, then our business, financial condition, results of operations and prospects could be materially adversely affected, the trading price of our ordinary shares could very likely decline, and you may lose all or part of your investment in our shares. The risks and uncertainties described below are not the only ones we face. In addition, the risks discussed below include forward-looking statements, and our actual results may differ substantially from those discussed in these forward-looking statements.
Risks Related to Our Business
We are a development-stage company with limited operating history. We may never be able to effectuate our business plan or achieve any revenue or reach profitability. Therefore, at this stage of our business, potential investors have a high probability of losing their entire investment.
We are a development-stage company, and are subject to all of the risks inherent in the establishment of a new business enterprise. We have a limited operating history and only a preliminary and unproven business plan upon which investors may evaluate our prospects. We have not yet demonstrated the feasibility of our digital X-ray source technology for commercial applications. Although we have produced a working prototype of the Nanox.ARC and developed a prototype of the Nanox.CLOUD, we have not entered into manufacturing agreements related to the production of the approximately 15,000 Nanox.ARC units planned for the initial global deployment. Even if we are able to do so, we may not be able to manufacture the Nanox.ARC at the low costs needed to support our business models, including the Subscription Model, which is our primary business model. We may not receive, or may be delayed in receiving, the necessary approval or clearance for the Nanox.ARC or our future products. We also have not entered into any commercial arrangement for the licensing of our X-ray source under the Licensing Model.
Furthermore, even if our technology becomes commercially viable, our business models may not generate sufficient revenue necessary to support our business. We estimate that effectively stimulating market interest in our Nanox System will require deploying at least 5,000 to 10,000 Nanox.ARC units. In addition, we estimate that a minimum installed base of at least 1,000 Nanox.ARC units will be needed to support our business during the initial deployment, assuming we enter into at least one licensing agreement on commercially reasonable terms. We may never achieve any of these thresholds for units deployed in the near-to-mid term at any level or at all, which may cause our business to fail. The Subscription Model is based on selling the Nanox System at low cost or no cost using a pay-per-scan pricing structure, which is pioneering for medical imaging companies and is subject to numerous risks. The medical imaging industry is also highly competitive and our technology, products, services or business models may not achieve widespread market acceptance. If we are unable to address any issues mentioned above, or encounter other problems, expenses, difficulties, complications, and delays in connection with the starting and expansion of our business, our entire business may fail, in which case you may lose your entire investment.
We have a history of net losses and negative cash flow from operations since inception and we expect such losses and negative cash flows to continue in the foreseeable future. As of December 31, 2019, we had negative working capital of approximately $10.6 million and shareholders deficit of approximately $8.8 million. For the years ended December 31, 2018 and 2019, we incurred net losses of approximately $1.9 million and $22.6 million, respectively. As of December 31, 2019, we had an accumulated deficit of approximately $40.6 million and negative cash flow from operations of $5.5 million and $3.7 million for the years ended December 31, 2019 and 2018, respectively. We anticipate our losses will continue to increase from current levels because we expect to incur additional costs related to developing our business, including research and
development costs, manufacturing costs, employee-related costs, costs of complying with government regulations, intellectual property development and prosecution costs, marketing and promotion costs, capital expenditures, general and administrative expenses, and costs associated with operating as a public company.
Our ability to generate revenue from our operations and, ultimately, achieve profitability will depend on, among others, whether we can complete the development and commercialization of our technology, our future products and our services, including our X-ray source technology, the Nanox.ARC and the Nanox.CLOUD, whether we can manufacture the Nanox.ARC on a commercial scale in such amounts and at such costs as we anticipate, and whether we can achieve market acceptance of our products, services and business models. We may never generate any revenue or operate on a profitable basis. Even if we achieve profitability, we may not be able to sustain it.
Our efforts may never demonstrate the feasibility of our digital X-ray source technology for commercial applications.
We have developed our X-ray source technology and a prototype of the Nanox.ARC. Even though we believe our X-ray source has achieved commercial applicability, our technology has not been tested over extended periods of time and therefore no meaningful data exists regarding the durability, safety and effectiveness of our X-ray source over extended periods. Although we have produced a working prototype of the Nanox.ARC, we may not be able to successfully integrate our X-ray source into the Nanox.ARC or any medical imaging system. In addition, there is no precedent for commercialization of technology like ours. Even with a fully functional prototype, the commercial scale production and deployment of Nanox.ARC will require significant additional development, sales and marketing efforts, and we may not be able to ensure the effectiveness, accuracy, consistency and safety of the Nanox.ARC in commercial settings. Any unanticipated technical or other problems and the possible insufficiency of funds and other resources needed to complete the development and commercialization of our X-ray source, the Nanox.ARC or the Nanox.CLOUD may result in delays and cause us to incur additional expenses that would increase our losses. If our X-ray source is not commercially feasible now or in the long term, our business may fail.
Two of our business models depend on the successful commercial application of the Nanox.CLOUD, which is subject to numerous risks and uncertainties.
In addition to the Nanox.ARC, we are also developing the Nanox.CLOUD, a companion cloud software designed to deliver MSaaS. We have not yet developed a beta version of the Nanox.CLOUD. The development and commercialization of the Nanox.CLOUD has a number of risks, including:
|•||the Nanox.CLOUD requires a considerable investment of technical, financial, and legal resources, which may not be available to us;|
|•||it may require separate regulatory clearances or approvals;|
|•||it may not be technically viable to integrate the Nanox.CLOUD with the businesses of our potential customers and collaborators, such as local operators, radiologists, cloud storage providers, medical AI software providers and others;|
|•||market acceptance of the MSaaS model is affected by a variety of factors, including security, reliability, scalability, customization, performance, customer preference, patients’ concerns with entrusting a third party to store and manage their health data, public concerns regarding privacy and compliance with restrictive laws or regulations;|
|•||our cloud-based service may raise concerns among our customer base, including concerns regarding changes to pricing over time, service availability, information security of a cloud-based solution and access to medical images while offline;|
|•||the Nanox.CLOUD may be subject to computer system failures, cyber-attacks or other security breaches;|
|•||incorrect or improper implementation or use of the Nanox.CLOUD by third-party cloud-service providers under our Sales Model could result in customer dissatisfaction and harm our business and reputation;|
|•||undetected software errors or flaws in the Nanox.CLOUD could harm our reputation or decrease market acceptance of the MSaaS model; and|
|•||we may incur higher costs than we expected as we expand our cloud-based services.|
If we are unable to successfully develop and commercialize the Nanox.CLOUD, our business, financial condition, results of operations and prospects could be negatively impacted.
We are highly dependent on the successful development, marketing and sale of our X-ray source technology and the related products and services.
Our core digital X-ray source technology is the basis of our business. The Nanox.ARC currently under development is being designed to integrate our X-ray source technology into a medical imaging device for commercial use. As a result, the success of our business plan is highly dependent on our ability to develop, manufacture and commercialize our X-ray source technology and related products and services, such as the Nanox.ARC and the Nanox.CLOUD, and our failure to do so could cause our business to fail. Successful commercialization of medical imaging devices is a complex and uncertain process, dependent on the efforts of management, manufacturers, local operators, integrators, medical professionals, third-party payors, as well as general economic conditions, among other factors. Any factor that adversely impacts the development and commercialization of our X-ray source technology or related products and services, including the Nanox.ARC, the Nanox.CLOUD and the Nanox System, will have a negative impact on our business, financial condition, results of operations and prospects. Some potential factors include:
|•||our ability to achieve sufficient market acceptance by hospitals and clinics, providers of medical imaging services, medical professionals such as radiologists, third-party payors and others in the medical community;|
|•||our ability to compete with existing medical imaging technology companies;|
|•||our ability to establish, maintain and expand our sales, marketing and distribution networks;|
|•||our ability to obtain and/or maintain necessary regulatory approvals; and|
|•||our ability to effectively protect our intellectual property.|
Our inability to successfully obtain clearance or approval for and subsequently commercialize our X-ray source technology or related products and services, and/or successfully develop and commercialize additional products or any enhancements to the products which we may develop would have a material adverse effect on our business, financial condition, results of operations and prospects.
Products utilizing our technology may need to be approved or cleared by the FDA and similar regulatory agencies worldwide. We may not receive, or may be delayed in receiving, the necessary approval or clearance for our future products, which would adversely affect business, financial condition, results of operations and prospects.
We expect to take a multi-step approach to the regulatory clearance process. As a first step, we submitted a 510(k) application to an accredited Review Organization under the FDAs 510(k) Third Party Review Program for a single-source version of the Nanox.ARC in January 2020. If we receive FDA clearance, we will continue to optimize and develop further features of the Nanox.ARC, and plan to submit additional 510(k) applications to the FDA with respect to the Nanox.ARC. We may also need to seek approval from foreign regulatory authorities. With respect to our X-ray source technology and the Nanox.CLOUD, although we believe that they do not require regulatory approval or clearance, regulatory agencies may not agree. To date, we have not had any discussion with the FDA or other regulatory authorities regarding the regulatory pathways for our product candidates. Efforts to achieve required governmental clearances and approvals could be costly and time consuming, and we may not be able to obtain any such required approvals in a timely and cost-efficient manner. Any delay or failure to obtain necessary regulatory clearances or approvals could have a material negative impact on our ability to generate revenues. Even if the products containing our technology receive the required regulatory clearance or approval, such products will remain subject to extensive regulatory requirements. If we fail to comply with the regulatory requirements of the FDA and other applicable U.S. and foreign regulatory authorities, or previously unknown problems with any approved commercial products, manufacturers or manufacturing processes are discovered, we could be subject to administrative or judicially imposed sanctions.
In addition, the cost of compliance with new laws or regulations governing our technology or future products could adversely affect our business, financial condition, results of operations and prospects. New laws or regulations may impose restrictions or obligations on us that could force us to redesign our technology or other future products or services, and may impose restrictions that are not possible or practicable to comply with, which could cause our business to fail. See —Risks Related to Government Regulation.
We will need to obtain additional financing to fund our future operations. If we are unable to obtain such financing, we may be unable to complete the development and commercialization of our technology and our products and services.
Our operations have consumed substantial amounts of cash since inception. Our net losses were $1.9 million and $22.6 million for the years ended December 31, 2018 and 2019, respectively. In addition, significant resources were invested in the development of our X-ray source technology prior to us acquiring the technology. We anticipate that our future cash requirements will continue to be significant. We will need to obtain additional financing, including the proceeds from this offering, to implement our business plan as described in this prospectus. Such financings could include equity financing, which may be dilutive to shareholders, or debt financing, which would likely restrict our ability to borrow from other sources. In addition, such securities may contain rights, preferences or privileges senior to those of the rights of our current shareholders. Additional funds may not be available when we need them, on terms attractive to us, or at all. If adequate funds are not available on a timely basis, we may be required to curtail the development of our technology, products or services, or materially delay, curtail, reduce or terminate our research and development and commercialization activities. We could be forced to sell or dispose of our rights or assets. Any inability to raise adequate funds on commercially reasonable terms could have a material adverse effect on our business, financial condition, results of operation and prospects, including the possibility that a lack of funds could cause our business to fail and liquidate with little or no return to investors.
The success of our primary business model, the Subscription Model, is subject to numerous risks and uncertainties.
We expect the Subscription Model to be our primary business model and the key to achieving our vision of increasing early-detection of medical conditions that are discoverable by X-ray. Even if we are able to successfully implement our Sales Model and/or our Licensing Model, the sustainability of our general business plan depends substantially on the sustainability of our Subscription Model. We believe that effectively stimulating market interest in our Nanox System will require deploying 5,000 to 10,000 Nanox.ARC units. In addition, we estimate that a minimum installed base of at least 1,000 Nanox.ARC units will be needed to support our business during the initial deployment, assuming we enter into at least one licensing agreement on commercially reasonable terms. The success of our Subscription Model will also depend on each device, once deployed, performing a sufficient number of scans per day to be fully utilized. We may not be successful in achieving these goals for various reasons, including:
|•||the process of manufacturing and deploying the Nanox System is a complex, multi-step process that depends on factors outside our control, and could cause us to expend significant time and resources prior to earning associated revenues;|
|•||the manufacturing cost of the Nanox.ARC may be higher than we expect, may increase significantly, or may increase at a higher rate than anticipated, and we may not be able to set or timely adjust our pay-per-scan pricing to compensate for any increased costs;|
|•||the manufacturing of the Nanox.ARC may take longer than we expected, and we may experience delays in the manufacturing and deployment of the Nanox System, which would have a negative impact on the timing of our revenues;|
|•||deployment and full utilization of the Nanox System may not be achieved or may take substantially longer than we expect, and we may not be able to deploy a sufficient number of units of the Nanox System to support our business or to effectively stimulate market interest;|
|•||a Nanox System may perform fewer scans per day than our estimates due to a number of factors, including low market acceptance rate, technical failures and downtime, service disruptions, outages or other performance problems, which would have a negative impact on our revenues and our ability to recover costs;|
|•||the implementation, integration and testing of the Nanox.CLOUD with our potential customers and collaborators can be complex, time-consuming and expensive for them, which may have a negative impact on the timing of our revenues;|
|•||as part of the Subscription Model, we will be responsible for maintenance of the Nanox System units we deploy, which may be more costly and time-consuming than we expect;|
|•||our customers may not be able to find or retain a sufficient number of radiologists to review the images generated by the Nanox System, especially as we deploy additional Nanox Systems and the volume of scans increases;|
|•||the portion of our pay-per-scan pricing allocated to our collaborators may not be acceptable to them, either now or in the future, and pricing negotiations with such collaborators may be a complex and time-consuming process;|
|•||our pay-per-scan pricing may not be sufficient to recover our costs and may not be adjusted in a timely manner, which could negatively affect our revenues or cause our revenues and results of operations to vary significantly from period to period;|
|•||we may be unsuccessful in maintaining our target price per scan because we do not control the price charged by local operators and higher prices may adversely affect market acceptance of the Nanox System; and|
|•||regulatory authorities may challenge our Subscription Model altogether, and impose significant civil, criminal, and administrative penalties, damages, fines, and/or exclusion from government funded healthcare programs, which could adversely affect our revenues and results of operations.|
Any of the above factors may negatively affect the implementation of our Subscription Model, or cause our Subscription Model to fail.
We may not be successful in tailoring our X-ray source to the specific systems of other medical imaging companies under our Licensing Model, and/or entering into licensing agreements on terms favorable to us.
Under our proposed Licensing Model, we expect to be engaged to tailor our X-ray source to other medical imaging companies specific systems to replace the legacy X-ray source or to license our X-ray source technology to them to develop new types of imaging systems, and we expect to receive a one-time, non-recurring licensing fee upfront, as well as recurring royalty payments for each imaging system sold by such companies. We expect customization to be a complex and multi-step process that varies for each project, which will require significant research and testing activities. We may also not be able to demonstrate the feasibility, functionality or safety of our technology in other medical imaging systems, meet the potential licensees design and manufacturing requirements, or satisfy their marketing and product needs. In addition, we may not be successful in entering into licensing agreements with favorable terms as a result of a numbers of factors, many of which are outside of our control, including willingness of, and the resources available to, other medical imaging companies to in-license our novel X-ray source technology, our ability to agree with a potential partner on the value of our technology, or on the related terms, as well as the availability of other technologies at lower cost or other alternative technologies at the time. We have not entered into any licensing agreements; however, we are in negotiations regarding a commercial arrangement with FUJIFILM Corporation for the licensing of our Nanox System. Any of the above factors may negatively affect the implementation of our Licensing Model, or cause our Licensing Model to fail.
To the extent that we license our X-ray source technology to other medical imaging companies, the products integrating our technology may need to be approved or cleared by the FDA or similar regulatory agencies.
The FDA may require products developed by other medical imaging companies under the Licensing Model to go through lengthier or more rigorous processes than we expected. These products may also be subject to regulations by governmental agencies in other jurisdictions, or regulation by other federal, state and local agencies. In addition, we may not have control with respect to any such further regulatory approval strategies or process. If such products do not receive, or are delayed in receiving, the necessary clearances or approvals, or if the performance of one or more clinical trials are required in connection with such clearances or approvals, the prospects of our Licensing Model may be materially affected, which could have a material adverse impact on our business and our revenues.
Our industry is highly competitive and is subject to technological change, which may result in new products or solutions that are superior to our technology or other future products we may bring to market from time to time. If we are unable to anticipate or keep pace with changes in the marketplace and the direction of technological innovation and customer demands, our technology may become less useful or obsolete and our operating results will suffer.
The medical imaging industry is rapidly evolving and subject to intense and increasing competition. To compete successfully and to be able to establish and maintain a competitive position in current and future technologies, we will need to demonstrate the advantages of our technology over well-established alternative solutions, products and technologies, such as CT, as well as newer methods of medical imaging and early detection. We believe that effectively stimulating market interest for the Nanox System will require deploying 5,000 to 10,000 Nanox.ARC units. To achieve this, we will need to raise or develop financial resources, technical expertise, marketing, distribution or support capabilities and we may not be successful in doing so.
Also, companies offering traditional medical imaging systems, such as General Electric, Siemens, Philips, Hologic, Varian, Fuji, Toshiba and Hitachi, may be better established in the market than we are, have greater corporate, financial, operational, sales and marketing resources than we do, or have more experience in research and development than we have. In particular, the field emission technology has been used by a wide range of leading market players in an attempt to create an alternative digital source of X-ray, the most well-known attempt being the use of carbon nano tubes as the base materials for a potential field emission-based solution. In addition, early-detection technologies developed by other companies, such as blood testing and DNA screening, may also reduce the attractiveness of our technology for early detection or render it obsolete. Successful developments of these or other technologies by competitors resulting in new approaches for medical imaging, including technologies, products or services that are more effective or commercially attractive, could make our technology less useful or obsolete. We may also face opposition from certain industry leaders, who may have political influence and the ability to delay deployment of the Nanox System in certain geographical areas.
Furthermore, as the market expands, we expect the entry of additional competitors, such as cloud computing companies or leading IT companies, who may have longer operating histories, more extensive international operations, greater name recognition, and/or substantially greater technical, marketing and financial resources.
Our competitive position also depends on our ability to:
|•||generate widespread awareness, acceptance and adoption of our technology and future products or services;|
|•||develop new or enhanced technologies or features that improve the convenience, efficiency, safety or perceived safety, and productivity of our technology and future products or services;|
|•||properly identify customer needs and deliver new products or services or product enhancements to address those needs;|
|•||limit the time required from prototype development to commercial production;|
|•||limit the timing and cost of regulatory approvals;|
|•||attract and retain qualified personnel and collaborators;|
|•||protect our inventions with patents or otherwise develop proprietary products and processes; and|
|•||secure sufficient capital resources to expand both our continued research and development, and sales and marketing efforts.|
If our technology is not, or our future products or services are not, competitive based on these or other factors, our business would be harmed.
We expect to depend on third parties to manufacture the Nanox.ARC and to supply certain component parts. Our reliance on third-party manufacturers and suppliers involve certain risks that may result in, among others, increased costs, quality or compliance issues, or failure to timely manufacture the Nanox.ARC, any of which could materially harm our business.
If cleared, we expect to rely on third-party manufacturers and suppliers for the commercial production of the Nanox.ARC. We are in negotiations with a global manufacturer to manufacture the Nanox.ARC, with a goal to enable the commercial production of the initial approximately 15,000 units planned for global deployment over
. We have not yet entered into any such agreement. In addition, although we have entered into arrangements with a manufacturer for the production of our X-ray tubes, we expect the manufacturer of the Nanox.ARC to negotiate and contract with other parties for the supply of the various other components of the Nanox.ARC. Our dependence on such third-party manufacturers and suppliers involves a number of risks, including:
|•||insufficient capacity or delays in meeting our demand;|
|•||inadequate manufacturing yields, inferior quality and excessive costs;|
|•||inability to manufacture products that meet the agreed upon specifications;|
|•||inability to obtain an adequate supply of materials;|
|•||inability to comply with the relevant regulatory requirements for the manufacturing process;|
|•||limited warranties on products supplied to us;|
|•||inability to comply with our contractual obligations;|
|•||potential increases in prices; and|
|•||increased exposure to potential misappropriation of our intellectual property.|
We currently expect to engage only one general manufacturer for the manufacture of the Nanox.ARC. We expect this general manufacturer will engage third-party suppliers for the production of the various components of the Nanox.ARC, except for the MEMs X-ray chip and the X-ray tube. We currently manufacture the MEMs X-ray chips and expect to continue to do so for the foreseeable future. In addition, we have direct agreements with manufacturers and/or suppliers for the production of our X-ray tube and expect to continue to do so. As we further expand our business in connection with the commercialization of our technology, we also expect to seek to engage alternative manufacturers of the Nanox.ARC. If any of our manufacturers or suppliers breach their agreements, are unable to meet their contractual or quality requirements, or become unwilling to perform for any reason, we may be unable, or may be unable in a timely manner, to locate alternative acceptable manufacturers or suppliers and enter into favorable agreements with them.
As mentioned above, we currently manufacture the MEMs X-ray chips in the clean rooms located in Tokyo, Japan, and rely on third parties to supply the raw materials and certain component parts. Disruptions of our relationships with such suppliers could negatively impact our production for an extended period of time. Any inability to acquire sufficient quantities of any raw materials or components in a timely manner from these third-party suppliers could have a material negative impact on our business.
In addition, if we are required to change the manufacturer of a critical component of our products, we will be required to verify that the new manufacturer maintains facilities, procedures and operations that comply with our quality and applicable regulatory requirements, which could further impede our ability to manufacture our products in a timely manner. Transitioning to a new supplier could be time-consuming and expensive, may result in interruptions in our operations and product delivery, could affect the performance specifications of our products or could require that we modify the design of those systems. If the change in manufacturer results in a significant change to any product, a new 510(k) clearance or approval from the FDA or similar international regulatory authorization may be necessary before we implement the change, which could cause substantial delays. The occurrence of any of these events could harm our ability to meet the demand for our products in a timely or cost-effective manner. See —Risks Related to Government Regulation.
We may experience development or manufacturing problems and higher costs, or delays that could limit our revenue, if any, or increase our losses.
Developing manufacturing procedures for new products requires developing specific production processes for those products. Developing such processes could be time consuming, and any unexpected difficulty in doing so can delay the introduction of the Nanox.ARC. Moreover, difficulties associated with adapting our technology and product design to the proprietary process technology and design rules of outside manufacturers can lead to reduced yields. Since low yields may result from either design or process technology failures, yield problems may not be effectively determined or resolved until an actual product exists that can be analyzed and tested to identify process sensitivities relating to the design rules that are used. As a result, yield problems may not be identified until well into the production process, and resolution of yield problems may require cooperation
between our manufacturers and us. This risk could be compounded by the offshore location of our manufacturers, increasing the effort and time required to identify, communicate and resolve manufacturing yield problems. Manufacturing defects that we do not discover during the manufacturing or testing process may lead to costly product recalls. These risks may lead to increased costs or delayed product delivery, which would harm our profitability and customer relationships. Furthermore, our, our manufacturers or our suppliers production processes and assembly methods may have to change to accommodate any significant, future expansion of our manufacturing capacity, which may increase the manufacturing costs, delay production of our products, reduce our product margin, require supplemental filings with the FDA or other regulatory authorities, any of which may adversely impact our business. If we are unable to keep up with demand for our products by successfully manufacturing and shipping our products in a timely manner, our revenue could be impaired, and market acceptance for our products could be adversely affected.
We may not be able to successfully execute our business models.
We are pursuing three simultaneous business models to maximize the commercial potential of our X-ray source technology, each of which requires significant time and resources, in particular, our primary business model, the Subscription Model. We are a company with limited operating history and we may not have the necessary resources, expertise and experience to successfully execute any of our business models on a global scale, such as obtaining the necessary approvals or clearances from the regulatory agencies of our target markets. Our ability to execute our models is dependent on a number of factors, including the ability of our senior management team to execute our models, our ability to engage local operators and integrators in different geographic regions, our ability to begin or maintain our pace of product development, manufacturing and commercialization, our ability to meet the changing needs of the medical imaging market, and the ability of our employees to perform at a high-level. If we are unable to execute our models, if our models do not drive the growth that we anticipate, or if our market opportunity is not as large as we have estimated, it could adversely affect our business and our prospects.
We may be unable to continue as a going concern if we do not successfully raise additional capital or if we fail to generate sufficient revenue from operations.
Primarily as a result of our lack of revenue, history of losses to date and our lack of liquidity, there is substantial uncertainty as to our ability to continue as a going concern, which is also described in the opinion of our independent registered accountants in our audited financial statements included in this prospectus. If we are unable to raise additional capital or if we are unable to generate sufficient revenue from our operations, we may not stay in business. We have no committed sources of capital and we may not be able to obtain additional financing when needed, on terms that are acceptable, or at all. We do not own any significant assets that we expect could serve as acceptable collateral for a bank or other commercial lender. The above circumstances may discourage some investors from purchasing our ordinary shares, lending us money, or from providing alternative forms of financing. The failure to satisfy our capital requirements would materially adversely affect our business, financial condition, results of operations and prospects. Unless we raise additional funds, either through the sale or issuance of equity securities or one or more collaborative arrangements, we will not have sufficient funds to continue operations. Even if we take these actions, they may be insufficient, particularly if our costs are higher than projected, unforeseen expenses arise or the development, production or commercialization of our technology or related products or services is delayed.
We have a limited operating history. If we successfully commercially launch the Nanox.ARC or the Nanox.CLOUD, and they do not achieve widespread market acceptance, we will not be able to generate the revenue necessary to support our business.
We have a limited operating history and have no history of marketing our X-ray source technology, the Nanox.ARC, the Nanox.CLOUD or any other product using our technology. We may fail to generate significant interest in our X-ray source technology, the Nanox.ARC, the Nanox.CLOUD or the imaging products using our technology, or any other product we may develop. These and other factors, including the following, may affect the rate and level of market acceptance:
|•||effectiveness of the sales and marketing efforts of us, and our partners such as the local partners;|
|•||perception by medical professionals and patients of the convenience, safety, efficiency and benefits of the Nanox.ARC, the Nanox.CLOUD or products using our technology, compared to competing methods of medical imaging;|
|•||opposition from certain industry leaders, which may limit our ability to promote the Nanox.ARC or the Nanox.CLOUD and to penetrate into the medical imaging market in certain geographical areas;|
|•||the existence of established medical imaging technology;|
|•||willingness of market participants to accept the MSaaS model;|
|•||timing of market introduction of competing products, and the sales and marketing initiatives of such products;|
|•||press and blog coverage, social media coverage, and other publicity and public relations factors by others;|
|•||lack of financing or other resources to successfully develop and commercialize our technology and implement our business plan;|
|•||the level of commitment and support that we receive from our partners, such as local operators, cloud storage providers and medical AI software providers, as well as medical professionals such as radiologists; and|
|•||coverage determinations and reimbursement levels of third party payors.|
If cleared or approved for marketing by the FDA or other regulatory agencies, depending on the approved clinical indication, the Nanox.ARC will be competing with existing and future imaging products and similar offerings. The technology underlying our X-ray source and the Nanox.ARC may be perceived as inferior or inaccurate and patients may be unwilling to undergo medical screening using the Nanox.ARC or other products using our technology. Moreover, patients and medical professionals may be unwilling to depart from the current medical imaging technology. Medical professionals tend to be slow to change their medical diagnostic practices because of perceived liability risks arising from the use of new technology or products, and they may not recommend medical imaging using the Nanox.ARC or other products using our technology until there is long-term clinical evidence to convince them to alter or modify their existing imaging methods. Our efforts to educate patients, radiologists and other members of the medical community on the benefits of our products require significant resources and may not be successful. Our efforts to educate the marketplace may require more resources than are required by conventional technologies marketed by our competitors. In particular, gaining market acceptance for our products in nascent markets, such as China, India, and certain countries in Latin America, could be challenging. Moreover, in the event that the Nanox.ARC or other products using our technology are the subject of guidelines, clinical studies or scientific publications that are unfavorable or damaging, or otherwise call into question their benefits, we may have difficulty in convincing market participants to adopt our products. In addition, medical professionals, patients, providers of medical imaging services and third-party payors may not adopt or reimburse the use of the Nanox.ARC in the near term or at all. If we are unable to achieve or maintain an adequate level of market acceptance, we may not generate significant revenue or become profitable and our business, financial condition, results of operations and prospects would be significantly harmed.
We plan to do business globally, including in certain countries where we might have limited resources and would be subject to additional regulatory burdens and other risks and uncertainties.
We expect to do business globally, including in the United States, China, India and Saudi Arabia, as well as the rest of the world, including Australia, New Zealand, the EU and Africa. Commercialization of our X-ray source technology, the Nanox.ARC or the Nanox System in foreign markets, either directly or through third parties, is subject to additional risks and uncertainties, including:
|•||reimbursement and insurance coverage;|
|•||our inability to find agencies, dealers or distributors in specific countries or regions;|
|•||our inability to directly control commercial activities of third parties;|
|•||limited resources to be deployed to a specific jurisdiction;|
|•||the burden of complying with complex and changing regulatory, tax, accounting and legal requirements;|
|•||different medical imaging practice and customs in foreign countries affecting acceptance in the marketplace;|
|•||import or export licensing and other requirements;|
|•||longer accounts receivable collection times;|
|•||longer lead times for shipping;|
|•||language barriers for technical training;|
|•||reduced protection of intellectual property rights in some foreign countries;|
|•||foreign currency exchange rate fluctuations; and|
|•||interpretations of contractual provisions governed by foreign laws in the event of a contract dispute.|
Sales of the Nanox.ARC, the Nanox.CLOUD or the Nanox System in foreign markets could also be adversely affected by the imposition of governmental controls, political and economic instability, trade restrictions and changes in tariffs, any of which may adversely affect our business, financial condition, results of operations and prospects.
Because the Nanox System is still in the development stage, it is not yet approved for third-party payor coverage or reimbursement. If in the future we are approved for and are otherwise able to commercialize it, but are unable to obtain adequate reimbursement or insurance coverage from third-party payors, we may not be able to generate significant revenue, in which case we may need to obtain additional financing.
Because the Nanox System is still in the development stage, it is not yet approved for third-party payor coverage or reimbursement. Coding and coverage determinations as well as reimbursement levels and conditions are important to the commercial success of an imaging product or offering. The future availability of insurance coverage and reimbursement for newly approved medical devices is highly uncertain, and our future business will be greatly impacted by the level of reimbursement provided by third-party payors. In the United States, third-party payors decide which imaging products and services they will cover, how much they will pay and whether they will continue reimbursement. Third-party payors may not cover or provide adequate reimbursement for the Nanox System or the imaging services using the Nanox System, assuming we are able to fully develop and obtain all regulatory approvals and clearances to market it in the United States or other geographies. To date, we have not had any discussions with any third-party payors, including any regulatory agencies administering any government funded healthcare programs, regarding the coding, coverage or reimbursement for imaging services using the Nanox System. Accordingly, unless government and other third-party payors provide coverage and reimbursement for our services, patients may not use them, which would cause investors to lose their entire investment. A primary trend in the United States healthcare industry and elsewhere is cost containment. Government authorities and other third-party payors have attempted to control costs by limiting coverage and the amount of reimbursement for particular products and services. Reimbursement may not be available, or continue to be available, for the Nanox System or the imaging services using the Nanox System, other products or systems using our X-ray source technology or any other products we may develop in the future, or even if reimbursement is available, such reimbursement may not be adequate. We also will be subject to foreign reimbursement policies in the international markets we expect to enter. Decisions by health insurers or other third-party payors in these markets not to cover, or to discontinue reimbursing, our products could materially and adversely affect our business. If such decisions are made, they could also have a negative impact on our ability to generate revenues, in which case we may need to obtain additional financing.
Recent changes in the United States related to payment policies for imaging procedures could have a negative impact on the utilization of our imaging services.
In the United States, over the past several years, the Centers for Medicare & Medicaid Services (CMS), the federal agency responsible for administering the Medicare program, has implemented numerous changes to payment policies for imaging procedures in both the hospital setting and non-hospital settings, which include physician offices and freestanding imaging facilities. Some of these changes have had a negative impact on utilization of imaging services. Examples of these changes include:
|•||limiting payments for imaging services in physician offices and free-standing imaging facility settings based upon rates paid to hospital outpatient departments;|
|•||reducing payments for certain imaging procedures when performed together with other imaging procedures in the same family of procedures on the same patient on the same day in the physician office and free-standing imaging facility setting;|
|•||making significant revisions to the methodology for determining the practice expense component of the Medicare payment applicable to the physician office and free-standing imaging facility setting which results in a reduction in payment; and|
|•||revising payment policies and reducing payment amounts for imaging procedures performed in the hospital outpatient setting.|
We also expect increased regulation and oversight of advanced diagnostic testing. One provision in the Protecting Access to Medicare Act requires CMS to develop appropriate use criteria (AUC) that professionals must consult when ordering advanced diagnostic imaging services (which include magnetic resonance imaging (MRI), CT, nuclear medicine (including position emission tomography) and other advanced diagnostic imaging services that the Secretary of the Department of Health and Human Services (HHS) may specify). Beginning in 2020, payment will be made to the furnishing professional for an applicable advanced diagnostic imaging service only if the claim indicates that the ordering professional consulted a qualified clinical decision support mechanism, as identified by HHS, as to whether the ordered service adheres to the applicable AUC. To the extent that these types of changes have the effect of reducing the aggregate number of diagnostic medical imaging procedures performed in the United States, our business, results of operations, financial condition and cash flows would be adversely affected.
Billing complexities associated with obtaining payment or reimbursement may negatively affect our revenue, cash flow and profitability.
Billing for imaging services is complex. Payment is provided by individual patients and from a variety of payors, such as commercial insurance carriers, managed care organizations and governmental programs. Each payor typically has different billing requirements, and the billing requirements of many payors have become increasingly stringent.
Among the factors complicating our customers ability to bill and receive reimbursement from third-party payors are:
|•||disputes among payors as to which party is responsible for payment;|
|•||disparity in coverage among various payors;|
|•||disparity in information and billing requirements among payors; and|
|•||incorrect or missing billing information, which is required to be provided by the ordering physician.|
In addition, we may be required to seek new billing codes for imaging services using the Nanox System, and regulatory authorities may not approve the creation of separate codes. Additionally, even if we are successful, these billing codes or the payment amounts associated with such codes may change in the future.
The impact of these factors may be compounded by our use of the novel Subscription Model. These billing complexities, and the related uncertainty in obtaining payment for our products, could negatively affect our revenue, cash flow and profitability.
Any collaborative arrangements that we may establish in the future may not be successful or we may otherwise not realize the anticipated benefits from these collaborations. We do not control third parties with whom we have or may have collaborative arrangements, and we will rely on them to achieve results which may be significant to us. In addition, any current or future collaborative arrangements may place the development and commercialization of our technology outside our control, may require us to relinquish important rights or may otherwise be on terms unfavorable to us.
We expect to enter into certain collaborative arrangements with respect to the research, development, manufacture, and commercialization of our technology with different relevant industry participants, including, among others, local operators, integrators, radiologists, cloud storage providers and medical AI software providers and third-party payors. Any future potential collaborative arrangements may require us to rely on external consultants, advisors, and experts for assistance in several key functions, including research and development, manufacturing, regulatory and intellectual property. We cannot and will not control these third parties, but we may rely on them to achieve results, which may be significant to us. Relying upon these collaborative arrangements for our technology subjects us to a number of risks, including:
|•||we may not be able to control the amount and timing of resources that our collaborators may devote to our technology;|
|•||should a collaborator fail to comply with applicable laws, rules or regulations when performing services for us, we could be held liable for such violations;|
|•||our collaborators may have a shortage of qualified personnel, particularly radiologists who can review the medical images generated by the Nanox System, especially as we deploy additional Nanox Systems and the volume of scans increases;|
|•||we may be required to relinquish important rights, such as marketing and distribution rights;|
|•||business combinations or significant changes in a collaborator’s business strategy may adversely affect a collaborator’s willingness or ability to complete its obligations under any arrangement;|
|•||under certain circumstances, a collaborator could move forward with a competing product developed either independently or in collaboration with others, including our competitors;|
|•||our current or future collaborators may utilize our proprietary information in a way that could expose us to competitive harm;|
|•||our collaborators could obtain ownership or other control over intellectual property that is material to our business; and|
|•||collaborative arrangements are often terminated or allowed to expire, which could delay the ability to commercialize our technology.|
In addition, if disputes arise between us and any of our collaborators, it could result in the delay or termination of the development, manufacturing or commercialization of products containing our technology, lead to protracted and costly legal proceedings, or cause collaborators to act in their own interest, which may not be in our interest. As a result, the collaborative arrangements that we may enter into, may not achieve their intended goals.
If any of these scenarios materialize, they could have a material adverse effect on our business, financial condition, results of operations and prospects.
We also may have other future products where it is desirable or essential to enter into agreements with a collaborator who has greater financial resources or different expertise than us, but for which we are unable to find an appropriate collaborator or are unable to do so on favorable terms. If we fail to enter into such collaborative agreements on favorable terms, it could materially delay or impair our ability to develop and commercialize, and increase the costs of development and commercialization of, our technology.
We could become subject to product liability claims, product recalls, and warranty claims that could be expensive, divert managements attention and harm our business reputation and financial results.
Our business exposes us to potential liability risks that are inherent in the marketing and sale of products used in patient care. We may be held liable if the Nanox System or if any other product that integrates our X-ray source technology causes injury or death or is found otherwise unsuitable during usage. The Nanox System currently under development incorporates sophisticated components and computer software. Complex software can contain errors, particularly when first introduced. In addition, new products or enhancements may contain undetected errors or performance problems that, despite testing, are discovered only after installation. Patients could allege or possibly prove defects of our products or other products that integrate our technology.
A product liability claim, regardless of its merit or eventual outcome, could result in significant legal defense costs and divert managements attention. Regardless of merit or eventual outcome, liability claims may result in:
|•||decreased demand for the Nanox System;|
|•||injury to our reputation;|
|•||costs of related litigation;|
|•||substantial monetary awards to patients and others;|
|•||loss of revenue; and|
|•||the inability to commercialize future products.|
Any of these outcomes may have an adverse effect on our business, financial condition and results of operations, and may increase the volatility of our share price.
The coverage limits of our insurance policies we may choose to purchase to cover related risks may not be sufficient to cover future claims. If sales of the Nanox System or other products integrating our technology increase or we suffer future product liability claims, we may be unable to maintain product liability insurance at satisfactory rates or with adequate amounts or at all. A product liability claim, any product recalls or excessive warranty claims, whether arising from defects in design or manufacture or otherwise, could negatively affect our sales or require a change in the design or manufacturing process, any of which could harm our relationship with our customers and partners, and have a material adverse impact on our reputation and business, financial condition, results of operations and prospects.
In addition, if the Nanox System or other products integrating our technology are defective, we, our future customers or partners may be required to notify regulatory authorities and/or to recall the products. See —Risks Related to Government Regulation—Our products may cause or contribute to adverse medical events or be subject to failures or malfunctions that we are required to report to the FDA, and if we fail to do so, we would be subject to sanctions that could harm our reputation, business, financial condition and results of operations. The discovery of serious safety issues with our products, or a recall of our products either voluntarily or at the direction of the FDA or another governmental authority, could have a negative impact on us. Any recall would divert managements attention and financial resources and harm our reputation with customers, patients, medical professionals and third-party payors. A recall involving the Nanox System would be particularly harmful to our business. The adverse publicity resulting from any of these actions could adversely affect the perception of our customers or partners. These investigations or recalls, especially if accompanied by unfavorable publicity, could result in our incurring substantial costs, losing revenues and damaging our reputation, each of which would harm our business, financial condition, results of operations and prospects.
We are highly dependent on key members of our executive management team. Our inability to retain these individuals could impede our business plan and growth strategies, which could have a negative impact on our business and the value of your investment.
Our ability to implement our business plan depends on the continued services of key members of our senior management. In particular, and to a critical extent, we are dependent on the continued efforts and services of the members of management named in the Management section. If we lose the services of such key members of our management team, we would likely be forced to expend significant time and money in the pursuit of replacement individuals, which may result in a delay in the implementation of our business plan and plan of operations. We may not be able to find satisfactory replacements on terms that would not be unduly expensive or burdensome to us. We do not currently carry a key-man life insurance policy that would assist us in recouping our costs in the event of the death or disability of our management team. The loss of members of our management team, or our inability to attract or retain other qualified individuals, could have a material adverse effect on our business, results of operations and financial condition.
The mishandling or the perceived mishandling of sensitive information, or the occurrence of data security breaches, could harm our business.
We expect that the Nanox System will enable us to accumulate a significant amount of highly sensitive and/or confidential information, including medical images and other medical information. These images could be received by our customers or collaborators, such as medical AI-analytics companies, to increase the probability of early disease detection. While employee contracts generally contain standard confidentiality provisions, our employees, customers or collaborators may not properly handle or process sensitive or confidential data. The improper handling of sensitive or confidential data, or even the perception of such mishandling (whether or not valid), or other security lapses by us, our customers or collaborators, could reduce demand for such products or otherwise expose us to financial or reputational harm or legal liability.
In addition, any security breach, including personal data breaches, or incident, including cybersecurity incidents, that we experience could result in unauthorized access to, misuse of, or unauthorized acquisition of the
sensitive or confidential information and data (including medical information), the loss, corruption, or alteration of this data, interruptions in our operations, or damage to our systems. Any such incidents could expose us to claims, litigation, regulatory or other governmental investigations, administrative fines and potential liability. An increasing number of digital platforms have disclosed breaches of their security, some of which have involved sophisticated and highly targeted attacks on portions of their services. Because the techniques used to obtain unauthorized access, disable or degrade service, or sabotage systems change frequently and often are not foreseeable or recognized until launched against a target, we may be unable to anticipate these techniques or to implement adequate preventative measures. If an actual or perceived breach of our security occurs, public perception of the effectiveness of our security measures and brand could be harmed and our results of operations could be negatively affected. Data security breaches and other incidents may also result from non-technical means (e.g., actions by employees or contractors). Any compromise of our security could result in a violation of applicable security, privacy or data protection, consumer and other laws, regulatory or other governmental investigations, enforcement actions, and legal and financial exposure, including potential contractual liability. Any such compromise could also result in damage to our reputation and a loss of confidence in our security and privacy or data protection measures. Any of these effects could materially and adversely affect our business, financial condition and results of operations.
Our business and operations would suffer in the event of computer system failures, cyber-attacks or deficiencies in our cyber-security.
Our ability to execute our business strategy depends, in part, on the continued and uninterrupted performance of our IT systems, which support our operations. Despite the implementation of security measures, our internal computer systems, and those of third parties on which we rely, are vulnerable to damage from, among others, computer viruses, malware, natural disasters, terrorism, war, telecommunication and electrical failures, cyber-attacks or cyber-intrusions over the Internet, attachments to emails, persons inside our organization, or persons with access to systems inside our organization or similar disruptive problems. The risk of a security breach or disruption, particularly through cyber-attacks or cyber intrusion, including by computer hackers, foreign governments, and cyber terrorists, has generally increased as the number, intensity and sophistication of attempted attacks and intrusions from around the world have increased. If such an event were to occur and cause interruptions in our operations, it could result in a material disruption of our product development programs. Any such security breach may compromise information stored on our networks and may result in significant data losses or theft of personally identifiable information. A cybersecurity breach could also hurt our reputation by adversely affecting the patients perception of the security of their information. A number of proposed and enacted federal, state and international laws and regulations obligate companies to notify individuals of security breaches involving particular personally identifiable information, which could result from breaches experienced by us or by third parties, including collaborators, vendors, contractors or other organizations with which we expect to form strategic relationships. In addition, a cybersecurity attack could result in other negative consequences, including disruption of our internal operations, increased cyber security protection costs, lost revenue, regulatory actions or litigations.
Exchange rate fluctuations between the U.S. dollar, Japanese Yen and the New Israeli Shekel and inflation may negatively affect our results of operations, and we may not be able to hedge our currency exchange risks successfully.
The U.S. dollar is our functional and reporting currency. However, a portion of our operating expenses, including personnel and facilities related expenses, are incurred in NIS and Yen. As a result, we are exposed to the risks that the NIS and Yen may appreciate relative to the U.S. dollar, or, if the NIS or Yen instead devalues relative to the U.S. dollar, that the inflation rate in Israel may exceed such rate of devaluation of the NIS or Yen, or that the timing of such devaluation may lag behind inflation in Israel. In any such event, the dollar cost of our operations in Israel would increase and our dollar-denominated results of operations would be adversely affected. Given our general lack of currency hedging arrangements to protect us from fluctuations in the exchange rates of the NIS and Yen and other foreign currencies in relation to the U.S. dollar (and/or from inflation of such foreign currencies), we may be exposed to material adverse effects from such movements. Our exchange rate exposure may change over time as our business evolves and could result in increased costs or reduced revenue and could affect our actual cash flow. Changes in the relative values of currencies occur regularly and, in some instances, may have a significant impact on our operating results. The rate of inflation in Israel or in currency exchange rates may materially change and we might not be able to effectively mitigate these risks.
If significant tariffs or other restrictions related to trade wars are placed on Chinese imports or any related counter-measures are taken by China, our revenue and results of operations may be materially harmed.
We have, and expect to enter into, agreements with manufacturers and/or suppliers in China for the production of our X-ray tube, the Nanox.ARC and some of their respective components. If significant tariffs or other restrictions are placed by the United States government on Chinese imports or any related counter-measures are taken by China, our business, financial condition and results of operations may be materially harmed. In July 2018, the Trump Administration announced a list of thousands of categories of goods that could face tariffs. If these duties or any other forms of duties or tariffs are imposed on the Nanox.ARC, our X-ray tube or their components, we may be required to charge higher prices in the United States than we expect, which may result in fewer customers and harm our operating performance. Alternatively, we may seek to shift production outside of China, resulting in significant costs and disruption to our operations and business. Additionally, the Trump Administration continues to signal that it may alter trade agreements and terms between China and the United States, including limiting trade with China, and may impose additional tariffs on imports from China. Our business could also be impacted by retaliatory trade measures taken by China or other countries in response to existing or future tariffs, causing us to raise prices or make changes to our operations, any of which could materially harm our business, financial condition and results of operations.
Our business may be impacted by changes in general economic conditions.
Our business is subject to risks arising from changes in domestic and global economic conditions, including adverse economic conditions in markets in which we operate, which may harm our business. If our future customers significantly reduce spending in areas in which our technology and products are utilized, or prioritize other expenditures over our technology and products, our business, financial condition, results of operations and prospects would be materially adversely affected.
Disruption to the global economy could also result in a number of follow-on effects on our business, including a possible slow-down resulting from lower customer expenditures; inability of customers to pay for products, solutions or services on time, if at all; more restrictive export regulations which could limit our potential customer base; negative impact on our liquidity, financial condition and share price, which may impact our ability to raise capital in the market, obtain financing and secure other sources of funding in the future on terms favorable to us.
In addition, the occurrence of catastrophic events, such as hurricanes, storms, earthquakes, tsunamis, floods, medical epidemics and other catastrophes that adversely affect the business climate in any of our markets could have a material adverse effect on our business, financial condition and results of operations. Some of our operations are located in areas that have been in the past, and may be in the future, susceptible to such occurrences.
The outcome of any future claims and litigation could have a material adverse impact on our business, financial condition and results of operations.
We may, from time to time, be party to litigation in the normal course of business, including class action lawsuits. Due to the inherent uncertainties of litigation, the final outcome of these lawsuits may differ substantially from our expectations and we may not be able to determine the amount of any potential losses we may incur. In the event we are required or determine to pay amounts in connection with any such lawsuits, such amounts could be significant and could have a material adverse impact on our liquidity, business, financial condition and results of operations.
We do not expect to carry any business interruption insurance or any other insurance (except for director and officer, property and product liability insurance). As a result, we may incur uninsured losses, increasing the possibility that you would lose your entire investment in our company.
Our products and services are in the medical imaging field and so may be subject to claims. We are not immune from product liability or other product claim risks, and we may not be able to maintain insurance on acceptable terms against such risks or that such insurance will be sufficient to protect us against potential claims or that insurance will be available in the future in amounts sufficient to protect us. A product liability claim or other claim, as well as any claims for uninsured liabilities or in excess of insured liabilities, could have a material adverse effect on our business, financial condition, results of operations and prospects.
Certain of our directors, director nominees and/or officers may have interests that compete with ours.
Certain of our directors currently own, operate and manage other entities, which may have similar or different objectives than ours. Such activities could detract from the time these people have to allocate to our affairs. In addition, we had previously entered into a certain consulting agreement and a certain service agreement with an entity owned by Ran Poliakine. See Certain Relationships and Related Party Transactions—Agreements With Directors, Director Nominees and Officers—Relationship With Six-Eye Interactive Ltd. The terms of such agreements may not be as favorable to us as those that could be obtained from a third party. Moreover, certain of our directors and officers are affiliated with our current shareholders, and may have different interests than other shareholders. For additional information regarding related party transactions and potential conflicts of interest, see Certain Relationships and Related Party Transactions. Under the Companies Law, office holders must promptly disclose to us any direct or indirect personal interest that he or she may have and all related material information or documents known to him or her relating to any existing or proposed transaction by us. See Fiduciary Duties and Approval of Specified Related Party Transactions and Compensation Under Israeli Law—Disclosure of Personal Interests of an Office Holder and Approval of Certain Transactions. In addition, on the closing of this offering, we will adopt a code of ethics and conduct that will require our employees, officers and directors to disclose any situation that reasonably would be expected to give rise to a conflict of interest.
Our management team has limited experience managing a public company.
Most members of our management team have limited experience managing a publicly traded company, interacting with public company investors and complying with the increasingly complex laws pertaining to public companies in the United States. Our management team may not successfully or efficiently manage our transition to being a public company subject to significant regulatory oversight and reporting obligations under the U.S. federal securities laws and the continuous scrutiny of securities analysts and investors. These new obligations and constituents will require significant attention from our senior management and could divert their attention away from the day-to-day management of our business, which could adversely affect our business, financial condition, results of operations and prospects.
Risks Related to Our Intellectual Property
It is difficult and costly to protect our intellectual property and our proprietary technologies, and we may not be able to ensure their protection.
We rely upon a combination of patents and trade secrets to protect the intellectual property related to our proprietary technologies. Our success depends significantly on our ability to obtain and maintain intellectual property protection with respect to our technology and products. Patents and other proprietary rights provide uncertain protections, and we may be unable to protect our intellectual property for reasons including those that result from complex factual and legal issues such as those that create uncertainty as to the validity, scope and enforceability of any particular patent that we hold or for which we have applied. As a result, we may be unsuccessful in defending our patents and other proprietary rights against third-party challenges, which could have a material adverse effect on our business.
Although we are attempting to obtain patent coverage for our technology where available and where we believe appropriate, there are aspects of the technology for which patent coverage may never be sought or received. Additionally, we have obtained, and may in the future obtain, certain intellectual property related to our technology from third parties, and we cannot be certain that such third parties took the necessary actions to maintain such rights or that the transfer of such rights to us was proper and effective. We may, as a result, be subject to claims challenging the ownership or enforceability of such rights. Furthermore, we may not possess the resources to, or for other reasons may not choose to, pursue patent protection on every invention or in any or every country where we may eventually decide to sell our future products. Our ability to prevent others from making or selling duplicate or similar technologies will be impaired for those technologies with respect to which, and in those countries where, we have no patent protection. In addition, there is no assurance that all potentially relevant prior art relating to our patents and patent applications has been found, which can prevent a patent from issuing from a pending patent application or later invalidate or narrow the scope of an issued patent. Even if patents do successfully issue and even if such patents cover our technology, third parties may challenge their validity, enforceability or scope, which may result in such patents being narrowed, invalidated, or held
unenforceable. Any successful challenge to these patents or any other patents owned by or licensed to us could deprive us of rights necessary for the successful commercialization of our technology.
In addition, for patents that do issue based on our applications or future applications, any issued patents may not provide us with any competitive advantages. Competitors may be able to design around our patents and develop products that provide outcomes comparable or superior to ours. Any changes we make to our product or any future products, including designs that may be required for commercialization or that cause them to have what we view as more advantageous properties, may not be covered by patents and patent applications we have licensed or own, and we may be required to file new applications and/or seek other forms of protection for any such altered products if any such protection is available. In addition, the patent prosecution process is expensive, time-consuming and complicated, and we and our current or future licensors, licensees or collaborators may not be able to prepare, file, prosecute and maintain all necessary or desirable patents or patent applications at a reasonable cost or in a timely manner. It is also possible that we or our current or future licensors, licensees or collaborators will fail to identify patentable aspects of inventions before it is too late to obtain patent protection for them. In addition, if we choose to and are able to secure patent protection in countries outside the U.S., the laws of some foreign countries may not protect our intellectual property rights to the same extent as do the laws of the United States. For instance, the legal systems of some countries, including India, China and other developing countries, do not favor the enforcement of patents and other intellectual property rights. This could make it difficult for us to stop the infringement of our patents or the misappropriation of our other intellectual property rights.
Some countries also have compulsory licensing laws under which a patent owner may be compelled to grant licenses to third parties. In addition, some countries limit the enforceability of patents against government agencies or government contractors. In these countries, the patent owner may have limited remedies, which could materially diminish the value of such patent. If we or any of our licensors is forced to grant a license to third parties with respect to any patents relevant to our business, our competitive position may be impaired.
Changes in either the patent laws or their interpretation in the United States and other countries may diminish our ability to protect our inventions and enforce our intellectual property rights, and more generally could affect the value of our intellectual property. Our efforts to seek patent protection for our technology could be negatively impacted by any such changes, which could have a material adverse effect on our existing patent rights and our ability to protect and enforce our intellectual property in the future. In particular, our ability to stop third parties from making, using, selling, offering to sell or importing products that infringe our intellectual property will depend in part on our success in obtaining and enforcing patent claims that cover our technology, inventions and improvements.
We may come to believe that third parties are infringing on, otherwise violating, our patents or other proprietary rights. To prevent infringement or unauthorized use, we may need to file infringement and/or misappropriation suits, which are very expensive and time-consuming, could result in meritorious counterclaims against us and would distract managements attention. Also, in an infringement or misappropriation proceeding, a court may decide that one or more of our patents is invalid, unenforceable, or both, in which case third parties may be able to use our technology without paying license fees or royalties. Even if the validity of our patents is upheld, a court may refuse to stop the other party from using the technology at issue on the grounds that the other partys activities are not covered by our patents.
In addition to patents, we rely on trade secrets to protect our technology; however, the policies we use to protect our trade secrets may not be effective in preventing misappropriation of our trade secrets by others. In addition, confidentiality agreements executed by our employees, consultants and advisors may not be enforceable or may not provide meaningful protection for our trade secrets or other proprietary information in the event of unauthorized use or disclosure. Litigating a trade secret claim is expensive and time consuming, and the outcome may be unexpected. In addition, courts outside the United States are sometimes less willing to protect trade secrets. Moreover, our competitors may independently develop knowledge, methods and know-how that allow them to create substantially similar products or services without misappropriating our trade secrets. If we are unable to protect our trade secrets, we may be unable to prevent competitors from using our own inventions and intellectual property to compete against us, and our business may be harmed.
Patent terms may be inadequate to protect our competitive position on our future products for an adequate amount of time.
Patents have a limited lifespan. In the United States, if all maintenance fees are timely paid, the natural expiration of a patent is generally 20 years from its earliest U.S. non-provisional filing date. Various extensions may be available, but the life of a patent, and the protection it affords, is limited. Even if patents covering our future products are obtained, once the patent life has expired, we may be open to competition from competitive products.
Given the amount of time required for the development, testing and regulatory review of new products, patents protecting our future products might expire before or shortly after we or our future partners commercialize those products. As a result, our owned and licensed patent portfolio may not provide us with sufficient rights to exclude others from commercializing products similar or identical to ours for a sufficient amount of time, and, as a result, we may not be able to obtain adequate protection from our patent portfolio against competition, in spite of the time and effort invested in the commercialization of our future products.
Claims that our technology or our future products or the sale or use of our future products infringe the patents or other intellectual property rights of third parties could result in costly litigation or could require substantial time and money to resolve, even if litigation is avoided.
Because our industry is characterized by competing intellectual property, we may be subject to legal actions for violating the intellectual property rights of others, including claims that former employees, collaborators or third parties have an interest in our patents, trade secrets or other intellectual property. For example, we may have inventorship or ownership disputes arising from conflicting obligations of employees, consultants or others who are involved in developing our technology or our products.
We also may be required to participate in interference, derivation or opposition proceedings that concern disputes regarding priority of inventions disclosed in our patents. Determining whether a product infringes a patent, as well as priority of inventions and other patent-related disputes, involves complex legal and factual issues and the outcome is often uncertain. We have not conducted any significant search of patents issued to third parties, and third-party patents containing claims covering our technology or methods that predate our patents may exist. Because of the number of patents issued and patent applications filed in our technical areas or fields (including some pertaining specifically to medical imaging technologies), our competitors or other third parties may assert that our technology and the methods we employ in the use of products incorporating our technology are covered by United States or foreign patents held by them. In addition, because patent applications can take many years to issue and because publication schedules for pending applications vary by jurisdiction, there may be applications now pending of which we are unaware, and which may result in issued patents that our technology or other future products would infringe. Also, because the claims of published patent applications can change between publication and patent grant, there may be published patent applications that may ultimately issue with claims that we infringe.
As the number of competitors in the market for medical imaging technologies increases, and as the number of patents issued in this area grows, the possibility of patent infringement claims against us increases. Some of our competitors may be able to sustain the costs of complex patent litigation more effectively than we can, including if they have substantially greater resources. Defending against such litigation is costly and time consuming, and would distract our management from our business. In addition, any uncertainties resulting from the initiation and continuation of any litigation could have a material adverse effect on our ability to raise the funds necessary to continue our operations.
In the event that we become subject to a patent infringement or other intellectual property lawsuit and if the relevant patents or other intellectual property were upheld as valid and enforceable and we were found to infringe or violate those rights or the terms of a license to which we are a party, we could be prevented from selling any infringing products of ours unless we could obtain a license or were able to redesign the product to avoid infringement. If we were unable to obtain a license or successfully redesign, we might be prevented from selling our technology or other future products. If we are able to redesign, we may need to invest substantial resources in the redesign process. If there is an allegation or determination that we have infringed the intellectual
property rights of a competitor or other person, we may be required to pay damages, or a settlement or ongoing royalties, or we may be required to enter into cross-licenses with our competitors. In any of these circumstances, we may be unable to sell our products at competitive prices or at all, and our business, financial condition, results of operations and prospects could be harmed.
In addition, we may be required to indemnify our customers and distributors against claims relating to the infringement of intellectual property rights of third parties related to our products. Third parties may assert infringement claims against our customers or distributors. These claims may require us to initiate or defend protracted and costly litigation on behalf of our customers or distributors, regardless of the merits of these claims. If any of these claims succeed, we may be forced to pay damages on behalf of our customers or distributors, or may be required to obtain licenses for the products or services they use. If we cannot obtain all necessary licenses on commercially reasonable terms, our distributors may be forced to stop distributing our products or services, and our customers may be forced to stop using our products or services.
Furthermore, because of the substantial amount of discovery required in connection with intellectual property litigation, there is a risk that some of our confidential information could be compromised by disclosure during discovery. There could also be public announcements of the results of hearings, motions or other interim proceedings or developments, which could have a material adverse effect on the price of our ordinary shares. If securities analysts or investors perceive these results to be negative, it could have a material adverse effect on the price of our ordinary shares.
Obtaining and maintaining patent protection depends on compliance with various procedural, document submission, fee payment and other requirements imposed by governmental patent agencies, and our patent protection could be reduced or eliminated if we or our future licensors do not comply with these requirements.
Periodic maintenance fees, renewal fees, annuity fees and various other government fees on a patent and patent application are due to be paid to the patent offices and agencies in several stages over the lifetime of the patent and patent application. The U.S. Patent and Trademark Office and various foreign governmental patent agencies require compliance with a number of procedural, documentary, fee payment and other similar provisions during the patent application process. In certain circumstances, we may be required to rely on our licensing partners to take the necessary action to comply with these requirements with respect to patents or other intellectual property they have licensed to us. While an inadvertent lapse can in many cases be cured by payment of a late fee or by other means in accordance with the applicable rules, there are situations in which noncompliance, which could include failure to respond to official actions within prescribed time limits, non-payment of fees and failure to properly legalize and submit formal documents, can result in abandonment or lapse of the patent or patent application, resulting in partial or complete loss of patent rights in the relevant jurisdiction. In such an event, our competitors may be able to enter the market and compete with our products, which would have a material adverse effect on our business.
We may be subject to claims that our employees, consultants or advisers have wrongfully used or disclosed alleged trade secrets of their former employers or claims asserting ownership of what we regard as our own intellectual property.
Many of our employees, consultants and advisers, including our senior management, were previously employed at other companies that may have proprietary rights related to our business. Some of these employees, consultants and advisers, including members of our senior management, executed proprietary rights, non-disclosure and non-competition agreements in connection with such previous employment. Although we try to ensure that such individuals do not use the proprietary information or know-how of others in their work for us, we may be subject to claims that we or these employees have used or disclosed intellectual property, including trade secrets or other proprietary information, of any such individuals former employer. We are not aware of any such disclosures, or threatened or pending claims related to these matters, but in the future, litigation may be necessary to defend against such claims. If we fail in defending any such claims, we may lose valuable intellectual property rights or personnel, in addition to possibly paying monetary damages and being enjoined from conducting our business as contemplated. Even if we are successful in defending against such claims, litigation could result in substantial costs and be a distraction to management.
Additionally, a licensor, collaborator, employee, consultant, adviser or other third party may dispute our or our licensors ownership of certain intellectual property rights. We seek to address these concerns in our
contractual agreements; however, we may not have contractual arrangements with the party in question and/or such provisions may not be effective. If these provisions prove to be ineffective, we may not be able to achieve our business objectives. If we or our licensors fail in defending any such claims, we may have to pay monetary damages and may lose valuable intellectual property rights, such as exclusive ownership of, or right to use, intellectual property which could adversely impact our business, financial condition and results of operations.
If our trademarks and trade names are not adequately protected, then we may not be able to build name recognition in our markets of interest and our business may be adversely affected.
Our unregistered trademarks or trade names are valuable assets and may be challenged, infringed, circumvented or declared generic or determined to infringe third partys marks. We may not be able to protect our rights to these trademarks and trade names, which may be necessary to build name recognition among potential collaborators or customers in our markets of interest. At times, competitors may adopt trade names or trademarks similar to ours, thereby impeding our ability to build brand identity and possibly leading to market confusion. In addition, there could be potential trade name or trademark infringement claims brought by owners of other trademarks or trademarks that incorporate variations of our unregistered trademarks or trade names. We have not conducted any registrability studies for possible future trademarks to assess whether such marks would be successfully registered. Over the long term, if we are unable to establish name recognition based on our trademarks and trade names, then we may not be able to compete effectively and our business may be adversely affected. In addition, we may license our trademarks and trade names to third parties, such as distributors. Though these license agreements may provide guidelines for how our trademarks and trade names may be used, a breach of these agreements or misuse of our trademarks and tradenames by our licensees may jeopardize our rights in or diminish the goodwill associated with our trademarks and trade names. Our efforts to enforce or protect our proprietary rights related to trademarks, trade names, trade secrets, domain names, copyrights or other intellectual property may be ineffective and could result in substantial costs and diversion of resources and adversely affect our competitive position, business, financial condition, results of operations and prospects.
Our rights to develop and commercialize our products may be subject to the terms and conditions of licenses and sublicenses granted to us by third parties.
We rely on licenses and sublicenses to certain patent rights and other intellectual property from third parties that are important or necessary to the development of our products, including the software modules that we expect to integrate into the Nanox.CLOUD. These and other licenses may not provide exclusive rights to use such intellectual property in all relevant fields of use and in all territories in which we may wish to develop or commercialize our products and the underlying patents may fail to provide the intended exclusivity. As a result, we may not be able to prevent competitors from developing and commercializing competitive products in the markets that we hope to address. Moreover, we would not own at least some of the underlying intellectual property rights related to these products, and as a result our rights would be subject to the continuation and compliance with the terms of those agreements. If such in-licenses were terminated, competitors would have the freedom to develop, seek regulatory approval of, and to market, products similar or identical to ours.
In addition, these license agreements may not grant us the right to control the preparation, filing, prosecution or maintenance of patents and patent applications covering our products. Therefore, we cannot be certain that these patents and patent applications will be prepared, filed, prosecuted or maintained in a manner consistent with the best interests of our business. If our current or future licensing partners fail to file, prosecute or maintain such patents, including the payment of applicable fees, or otherwise lose rights to those patents or patent applications, the intellectual property we have licensed or exclusivity we have been granted may be reduced or eliminated, and our right to develop and commercialize any of our future products that are subject of such licensed rights, and our ability to prevent competitors from developing or commercializing such products, could be adversely affected. In addition, even where we have the right to control patent prosecution and maintenance of patents and patent applications we have licensed from third parties, we may still be adversely affected or prejudiced by actions or inactions of our licensees, our licensors and their counsel that took place prior to the date upon which we assumed control over patent prosecution.
Pursuant to the terms of such license agreements, the licensors may also have the right to control enforcement of our licensed patents or defense of any claims asserting the invalidity or unenforceability of these patents. Even if we are permitted to pursue the enforcement or defense of our licensed patents, we may require the cooperation of our future licensors or collaboration partners and any other applicable patent owners and we
cannot be certain that such cooperation will be provided to us. We also cannot be certain that our licensors will allocate sufficient resources or prioritize their or our enforcement of such patents or defense of such claims to protect our interests in the licensed patents. Even if we are not a party to these legal actions, an adverse outcome could harm our business because it might prevent us from continuing to license intellectual property that we may need to operate our business. If we lose any of our licensed intellectual property, our right to develop and commercialize any of our products that are subject of such licensed rights could be adversely affected.
In addition, our future licensors may rely on third-party consultants or collaborators or on funds from third parties such that our licensors are not the sole and exclusive owners of the patents we in-license. If other third parties have ownership rights to our in-licensed patents, they may be able to license such patents to our competitors, and our competitors could market competing products and technologies. In addition, if our licensors have not obtained adequate rights from these third parties, we may need to obtain additional rights from these third parties or we could be prevented from developing and commercializing the related products. This could have a material adverse effect on our competitive position, business, financial conditions, results of operations and prospects.
In spite of our best efforts, our licensors might conclude that we have materially breached our license agreements and might therefore terminate the license agreements, in which event we may have to cease developing, manufacturing or marketing any product covered by these agreements and we may face other additional penalties or be required to grant our licensors additional rights. In addition, we may seek to obtain additional licenses from our licensors and, in connection with obtaining such licenses, we may agree to amend our existing licenses in a manner that may be more favorable to the licensors, including by agreeing to terms that could enable third parties (potentially including our competitors) to receive licenses to a portion of the intellectual property that is subject to our existing licenses. Any of these events could have a material adverse effect on our competitive position, business, financial conditions, results of operations and prospects.
We may be required to pay certain milestones and royalties and fulfill other obligations under our license agreements with third-party licensors.
We may be required to pay milestones and royalties related to our development or commercialization activities of our products utilizing the technologies licensed or sublicensed from third parties under license agreements we may enter into with them. These payments could adversely affect our overall profitability related to any future products that we may seek to develop or commercialize. In order to maintain our license rights under our license agreements, we may need to meet certain specified milestones or fulfill certain obligations, including to devote a certain amount of resources, in the development of our products. Failure to satisfy such obligations could result in the termination of our rights under such agreements.
If we choose to license our technology to third parties, this could result in disputes or otherwise limit our future operations.
We may also in the future, as one of our strategies, deploy our technology into the market and license patents and other intellectual proprietary rights to third parties. Disputes with our licensees may arise, including regarding the scope and content of these licenses. Additionally, a licensee may use our intellectual property without our permission, dispute our ownership of certain intellectual property rights or argue that our intellectual property does not cover our product. Regardless of whether we pursue legal action to enforce any such dispute, a dispute with a licensee or customer over intellectual property rights may damage our relationship with that licensee or customer and may also harm our reputation in the industry. Our ability to expand into additional fields with our technologies also may be restricted by licenses or other rights we may grant to third parties in the future, including if the licenses are exclusive, the licensee is assigned ownership of intellectual property that we develop or rights of first negotiation or refusal are granted. For instance, pursuant to the Right of First Negotiation Agreement with FUJIFILM Corporation, dated May 21, 2019, we granted FUJIFILM Corporation a right of first negotiation to obtain an exclusive license to certain of our intellectual property for use in the field of mammography. See Business—Our Business Model—The Licensing Model for a description of the terms of such agreement. While we do not currently plan to use this intellectual property in this field, if we chose to do so in the future, our ability would be limited by these rights and any related rights granted in the future to FUJIFILM Corporation.
Risks Related to Government Regulation
Our product candidates and operations are subject to extensive government regulation and oversight both in the United States and abroad, and our failure to comply with applicable requirements could harm our business.
We expect the Nanox.ARC and other future products we develop to be regulated by the FDA as medical devices. Our product candidate is subject to extensive regulation in the United States and elsewhere, including by the FDA and its foreign counterparts, the U.S. Department of Justice (the DOJ) and the U.S. Health and Human Services-Office of the Inspector General (HHS). The FDA and foreign regulatory agencies regulate, among other things, with respect to medical devices: design, development and manufacturing; testing, labeling, content and language of instructions for use and storage; clinical trials; product safety; establishment registration and device listing; marketing, sales and distribution; pre-market clearance and approval; conformity assessment procedures; record keeping procedures; advertising and promotion; recalls and field safety corrective actions; post-market surveillance, including reporting of deaths or serious injuries and malfunctions that, if they were to occur, could lead to death or serious injury; post-market approval studies; and product import and export.
The regulations our product candidate is subject to are complex and have tended to become more stringent over time. Regulatory changes could result in restrictions on our ability to carry on or expand our operations, higher than anticipated costs or lower than anticipated sales for any approved product. Failure to comply with applicable regulations could jeopardize our ability to sell our future products, if cleared or approved, and result in enforcement actions such as: warning or untitled letters; fines; injunctions; consent decrees; civil penalties; customer notifications; termination of distribution; recalls or seizures of products; administrative detention of medical devices believed to be adulterated or misbranded; delays in the introduction of products into the market; operating restrictions; total or partial suspension of production; refusal to grant future clearances or approvals for new products, new intended uses or modifications to our products; withdrawals or suspensions of current approvals, resulting in prohibitions on sales of our products; and in the most serious cases, criminal prosecution or penalties. The occurrence of any of these events would have a material adverse effect on our business, financial condition and results of operations and could result in shareholders losing their entire investment.
We may not receive, or may be delayed in receiving, the necessary clearances or approvals for our future products, and failure to timely obtain necessary clearances or approvals for our future products would adversely affect our ability to grow our business.
In the United States, before we can market a new medical device, or a new use of, new claim for or significant modification to an existing product, we must first receive either clearance under Section 510(k) of the Federal Food, Drug, and Cosmetic Act (the FDCA) or approval of a pre-market approval application (a PMA) from the FDA, unless an exemption applies. In the 510(k) clearance process, before a device may be marketed, the FDA must determine that a proposed device is substantially equivalent to a legally-marketed predicate device, which includes a device that has been previously cleared through the 510(k) process, a device that was legally marketed prior to May 28, 1976 (pre-amendments device), a device that was originally on the U.S. market pursuant to an approved PMA and later down-classified, or a 510(k)-exempt device. To be substantially equivalent, the proposed device must have the same intended use as the predicate device, and either have the same technological characteristics as the predicate device or have different technological characteristics and not raise different questions of safety or effectiveness than the predicate device. Clinical data are sometimes required to support substantial equivalence. In the process of obtaining PMA approval, the FDA must determine that a proposed device is safe and effective for its intended use based, in part, on extensive data, including, but not limited to, technical, pre-clinical, clinical trial, manufacturing and labeling data. The PMA process is typically required for devices that are deemed to pose the greatest risk, such as life-sustaining, life-supporting or implantable devices.
Modifications to products that are approved through a PMA application generally require FDA approval. Similarly, certain modifications made to products cleared through a 510(k) may require a new 510(k) clearance. Both the PMA approval and the 510(k) clearance process can be expensive, lengthy and uncertain. The FDAs 510(k) clearance process usually takes from three to 12 months, but can last longer. The process of obtaining a PMA is much more costly and uncertain than the 510(k) clearance process and generally takes from one to three years, or even longer, from the time the application is submitted to the FDA. In addition, a PMA generally requires the performance of one or more clinical trials. Despite the time, effort and cost, a device may not be
approved or cleared by the FDA. Any delay or failure to obtain necessary regulatory clearances or approvals could harm our business. Furthermore, even if we are granted regulatory clearances or approvals, they may include significant limitations on the indicated uses for the device or other restrictions or requirements, which may limit the market for the device.
In the United States, we expect to take a multi-step approach to the regulatory clearance process. As a first step, we submitted a 510(k) application for a single-source version of the Nanox.ARC to an accredited Review Organization under the FDAs 510(k) Third Party Review Program in January 2020. If we receive FDA clearance, we will continue to optimize and develop further features of the Nanox.ARC, and plan to submit additional 510(k) applications to the FDA with respect to the Nanox.ARC. If cleared, any modification to these systems that has not been previously cleared may require us to submit a new 510(k) premarket notification and obtain clearance, or submit a PMA and obtain FDA approval prior to implementing the change. Specifically, any modification to a 510(k)-cleared device that could significantly affect its safety or effectiveness, or that would constitute a major change in its intended use, design or manufacture, requires a new 510(k) clearance or, possibly, approval of a PMA. The FDA requires every manufacturer to make this determination in the first instance, but the FDA may review any manufacturers decision. The FDA may not agree with our decisions regarding whether new clearances or approvals are necessary. We may make modifications or add additional features in the future that we believe do not require a new 510(k) clearance or approval of a PMA. If the FDA disagrees with our determination and requires us to submit new 510(k) notifications or PMA applications for modifications to our previously cleared products for which we have concluded that new clearances or approvals are unnecessary, we may be required to cease marketing or to recall the modified product until we obtain clearance or approval, and we may be subject to significant regulatory fines or penalties. If the FDA requires us to go through a lengthier, more rigorous examination for future products or modifications to existing products than we had expected, product introductions or modifications could be delayed or canceled, which could adversely affect our ability to grow our business.
The FDA can delay, limit or deny clearance or approval of a medical device for many reasons, including:
|•||our inability to demonstrate to the satisfaction of the FDA or the applicable regulatory entity or notified body that our product candidates are safe or effective for their intended uses;|
|•||the disagreement of the FDA or the applicable foreign regulatory body with the design or implementation of our clinical trials or the interpretation of data from pre-clinical studies or clinical trials;|
|•||serious and unexpected adverse effects experienced by participants in our clinical trials;|
|•||the data from our pre-clinical studies and clinical trials may be insufficient to support clearance or approval, where required;|
|•||our inability to demonstrate that the clinical and other benefits of the device outweigh the risks;|
|•||the manufacturing process or facilities we use may not meet applicable requirements; and|
|•||the potential for approval policies or regulations of the FDA or applicable foreign regulatory bodies to change significantly in a manner rendering our clinical data or regulatory filings insufficient for clearance or approval.|
In order to sell our products in member countries of the European Economic Area (EEA), our products must comply with the essential requirements of the EU Medical Devices Directive (Council Directive 93/42/EEC). Compliance with these requirements is a prerequisite to be able to affix the Conformité Européene (CE) mark to our products, without which they cannot be sold or marketed in the EEA. To demonstrate compliance with the essential requirements we must undergo a conformity assessment procedure, which varies according to the type of medical device and its classification. Except for low-risk medical devices (Class I non-sterile, non-measuring devices), where the manufacturer can issue a European Community (EC) Declaration of Conformity based on a self-assessment of the conformity of its products with the essential requirements of the EU Medical Devices Directive, a conformity assessment procedure requires the intervention of an organization accredited by a member state of the EEA to conduct conformity assessments, or a Notified Body. Depending on the relevant conformity assessment procedure, the Notified Body would typically audit and examine the technical file and the quality system for the manufacture, design and final inspection of our devices.
The Notified Body issues a certificate of conformity following successful completion of a conformity assessment procedure conducted in relation to the medical device and its manufacturer and their conformity with the essential requirements. This certificate entitles the manufacturer to affix the CE mark to its medical devices after having prepared and signed a related EC Declaration of Conformity.
As a general rule, demonstration of conformity of medical devices and their manufacturers with the essential requirements must be based, among other things, on the evaluation of clinical data supporting the safety and performance of the products during normal conditions of use. Specifically, a manufacturer must demonstrate that the device achieves its intended performance during normal conditions of use, that the known and foreseeable risks, and any adverse events, are minimized and acceptable when weighed against the benefits of its intended performance, and that any claims made about the performance and safety of the device are supported by suitable evidence. If we fail to remain in compliance with applicable European laws and directives, we would be unable to continue to affix the CE mark to our products, which would prevent us from selling them within the EEA.
Failure to comply with post-marketing regulatory requirements could subject us to enforcement actions, including substantial penalties, and might require us to recall or withdraw a product from the market.
If we receive regulatory clearance or approval of the Nanox.ARC or other future products, we will remain subject to ongoing and pervasive regulatory requirements governing, among other things, the manufacture, marketing, advertising, medical device reporting, sale, promotion, import, export, registration, and listing of devices. For example, we will be required to submit periodic reports to the FDA as a condition of 510(k) clearance. These reports include information about failures and certain adverse events associated with the device after its clearance. Failure to submit such reports, or failure to submit the reports in a timely manner, could result in enforcement action by the FDA. Following its review of the periodic reports, the FDA might ask for additional information or initiate further investigation.
The regulations to which we are subject are complex and have become more stringent over time. Regulatory changes could result in restrictions on our ability to continue or expand our operations, higher than anticipated costs, or lower than anticipated sales. Even after we have obtained the proper regulatory clearance to market a device, we have ongoing responsibilities under FDA regulations and applicable foreign laws and regulations. The FDA, state and foreign regulatory authorities have broad enforcement powers. Our failure to comply with applicable regulatory requirements could result in enforcement action by the FDA, state or foreign regulatory authorities, which may include any of the following sanctions:
|•||untitled letters or warning letters;|
|•||fines, injunctions, consent decrees and civil penalties;|
|•||recalls, termination of distribution, administrative detention, or seizure of our products;|
|•||customer notifications or repair, replacement or refunds;|
|•||operating restrictions or partial suspension or total shutdown of production;|
|•||delays in or refusal to grant our requests for future clearances or approvals or foreign marketing authorizations of new products, new intended uses, or modifications to existing products;|
|•||withdrawals or suspensions of product clearances or approvals, resulting in prohibitions on sales of our products;|
|•||FDA refusal to issue certificates to foreign governments needed to export products for sale in other countries; and|
Any of these sanctions could result in higher than anticipated costs or lower than anticipated sales and have a material adverse effect on our reputation, business, financial condition and results of operations.
In addition, the FDA or state or foreign authorities may change their clearance and approval policies, adopt additional regulations or revise existing regulations, or take other actions, which may prevent or delay clearance or approval of our future products under development on a timely basis. Such policy or regulatory changes could impose additional requirements upon us that could delay our ability to obtain new clearances or approvals, increase the costs of compliance or restrict our ability to maintain any approvals we are able to obtain. For
example, the FDA recently announced forthcoming steps that the FDA intends to take to modernize the premarket notification pathway under Section 510(k) of the FDCA. For more information, see —Legislative or regulatory reforms in the United States or the EU may make it more difficult and costly for us to obtain regulatory clearances or approvals for our products or to manufacture, market or distribute our products after clearance or approval is obtained.
Our products must be manufactured in accordance with federal, state and foreign regulations, and we could be forced to recall our devices or terminate production if we fail to comply with these regulations.
The methods used in, and the facilities used for, the manufacture of our products must comply with the Quality System Regulation (QSR), which is a complex regulatory scheme that covers the procedures and documentation of the design, testing, production, process controls, quality assurance, labeling, packaging, handling, storage, distribution, installation, servicing and shipping of medical devices. As manufacturers of electron radiation-emitting products, we are also responsible for compliance with the radiological health regulations and certain radiation safety performance standards.
Furthermore, we are required to verify that our suppliers maintain facilities, procedures and operations that comply with our quality standards and applicable regulatory requirements. The FDA enforces the QSR through periodic announced or unannounced inspections of medical device manufacturing facilities, which may include the facilities of subcontractors. Our products are also subject to similar state regulations and various laws and regulations of foreign countries governing manufacturing.
Our third-party manufacturers may not take the necessary steps to comply with applicable regulations, which could cause delays in the delivery of our products. In addition, failure to comply with applicable FDA or state or foreign requirements or later discovery of previously unknown problems with our products or manufacturing processes could result in, among other things: warning letters or untitled letters; fines, injunctions or civil penalties; suspension or withdrawal of approvals; seizures or recalls of our products; total or partial suspension of production or distribution; administrative or judicially imposed sanctions; the FDAs refusal to grant pending or future clearances or approvals for our products; clinical holds; refusal to permit the import or export of our products; and criminal prosecution of us, our suppliers or our employees.
Any of these actions could significantly and negatively affect supply of our products. If any of these events occurs, our reputation could be harmed, we could be exposed to product liability claims and we could lose customers and experience reduced sales and increased costs.
The misuse or off-label use of our products may harm our reputation in the marketplace, result in injuries that lead to product liability suits or result in costly investigations, fines or sanctions by regulatory bodies if we are deemed to have engaged in the promotion of these uses, any of which could be costly to our business.
Advertising and promotion of our future products that obtains approval in the United States may be heavily scrutinized by the FDA, the DOJ, HHS, state attorneys general, members of Congress, and the public. In addition, advertising and promotion of any future product that obtains approval outside of the United States will be heavily scrutinized by comparable foreign regulatory authorities.
We expect that, if cleared or approved, our products, including the Nanox.ARC, will be cleared by the requisite regulatory authorities for specific indications. We expect to train our marketing personnel and direct sales force to not promote our devices for uses outside of the FDA-approved indications for use, known as off-label uses. We cannot, however, prevent a physician from using our devices off-label, when in the physicians independent professional medical judgment he or she deems it appropriate. There may be increased risk of injury to patients if physicians attempt to use our devices off-label. Furthermore, the use of our devices for indications other than those approved by the FDA or approved by any foreign regulatory body may not effectively treat such conditions, which could harm our reputation in the marketplace among healthcare providers and patients.
If the FDA or any state or foreign regulatory body determines that our promotional materials or training constitute promotion of an off-label use, it could request that we modify our training or promotional materials or subject us to regulatory or enforcement actions, including the issuance or imposition of an untitled letter, which is used for violators that do not necessitate a warning letter, injunction, seizure, civil fine or criminal penalties. It is also possible that other federal, state or foreign enforcement authorities might take action under other
regulatory authority, such as false claims laws, if they consider our business activities to constitute promotion of an off-label use, which could result in significant penalties, including, but not limited to, criminal, civil and administrative penalties, damages, fines, disgorgement, exclusion from participation in government healthcare programs and the curtailment of our operations. We may become subject to such actions and, if we are not successful in defending against such actions, those actions may have a material adverse effect on our business, financial condition and results of operations. Equivalent laws and potential consequences exist in foreign jurisdictions.
In addition, if our products are cleared or approved, healthcare providers may misuse our products or use improper techniques if they are not adequately trained, potentially leading to injury and an increased risk of product liability. If our devices are misused or used with improper technique, we may become subject to costly litigation by our customers or their patients. As described above, product liability claims could divert managements attention from our core business, be expensive to defend and result in sizeable damage awards against us that may not be covered by insurance.
Our products may cause or contribute to adverse medical events or be subject to failures or malfunctions that we are required to report to the FDA, and if we fail to do so, we would be subject to sanctions that could harm our reputation, business, financial condition and results of operations. The discovery of serious safety issues with our products, or a recall of our products either voluntarily or at the direction of the FDA or another governmental authority, could have a negative impact on us.
If the Nanox.ARC or our other future products receive clearance or approval, we will be subject to the FDAs medical device reporting regulations and similar foreign regulations, which require us to report to the FDA when we receive or become aware of information that reasonably suggests that one or more of our products may have caused or contributed to a death or serious injury or malfunctioned in a way that, if the malfunction were to recur, it could cause or contribute to a death or serious injury. The timing of our obligation to report is triggered by the date we become aware of the adverse event as well as the nature of the event. We may fail to report adverse events of which we become aware within the prescribed timeframe. We may also fail to recognize that we have become aware of a reportable adverse event, especially if it is not reported to us as an adverse event or if it is an adverse event that is unexpected or removed in time from the use of the product. If we fail to comply with our reporting obligations, the FDA or other regulatory bodies could take action, including warning letters, untitled letters, administrative actions, criminal prosecution, imposition of civil monetary penalties, revocation of our device clearance or approval, seizure of our products or delay in clearance or approval of future products.
The FDA and foreign regulatory bodies have the authority to require the recall of commercialized products in the event of material deficiencies or defects in design or manufacture of a product or in the event that a product poses an unacceptable risk to health. The FDAs authority to require a recall must be based on a finding that there is reasonable probability that the device could cause serious injury or death. We may also choose to voluntarily recall a product if any material deficiency is found. A government-mandated or voluntary recall by us could occur as a result of an unacceptable risk to health, component failures, malfunctions, manufacturing defects, labeling or design deficiencies, packaging defects or other deficiencies or failures to comply with applicable regulations. Product defects or other errors may occur in the future.
Depending on the corrective action we take to redress a products deficiencies or defects, the FDA may require, or we may decide, that we will need to obtain new clearances or approvals for the device before we may market or distribute the corrected device. Seeking such clearances or approvals may delay our ability to replace the recalled devices in a timely manner. Moreover, if we do not adequately address problems associated with our devices, we may face additional regulatory enforcement action, including FDA warning letters, product seizure, injunctions, administrative penalties or civil or criminal fines.
Companies are required to maintain certain records of recalls and corrections, even if they are not reportable to the FDA. We may initiate voluntary withdrawals or corrections for our products in the future that we determine do not require notification of the FDA. If the FDA disagrees with our determinations, it could require us to report those actions as recalls and we may be subject to enforcement action. A future recall announcement could harm our reputation with customers, potentially lead to product liability claims against us and negatively affect our sales. Any corrective action, whether voluntary or involuntary, as well as defending ourselves in a lawsuit, will require the dedication of our time and capital, distract management from operating our business and may harm our reputation and financial results.
Our relationships with customers and third-party payors will be subject to applicable anti-kickback, fraud and abuse and other healthcare laws and regulations, which could expose us to criminal sanctions, civil penalties, contractual damages, reputational harm and diminished profits and future earnings.
Physicians, other healthcare providers, and third-party payors will play a primary role with respect to any future products for which we obtain marketing approval. Our arrangements with third-party payors and customers may expose us to broadly applicable fraud and abuse and other healthcare laws and regulations that may constrain the business or financial arrangements and relationships through which we market, sell and distribute our product. Restrictions under applicable federal and state healthcare laws and regulations include the following:
|•||The U.S. federal healthcare program Anti-Kickback Statute prohibits, among other things, persons from knowingly and willfully soliciting, offering, receiving or providing remuneration, directly or indirectly, in cash or in kind, to induce or reward either the referral of an individual for, or the purchase, order or recommendation of, any good or service, for which payment may be made, in whole or in part, under federal healthcare programs such as Medicare and Medicaid. Although there are a number of statutory exemptions and regulatory safe harbors protecting certain common activities from prosecution, the exemptions and safe harbors are drawn narrowly and practices that involve remuneration to those who prescribe, purchase, or recommend medical devices, including certain discounts, or engaging consultants as speakers or consultants, may be subject to scrutiny if they do not fit squarely within the exemption or safe harbor. Our practices may not in all cases meet all of the criteria for safe harbor protection from anti-kickback liability. Moreover, there are no safe harbors for many common practices, such as educational and research grants. Liability may be established without a person or entity having actual knowledge of the federal Anti-Kickback Statute or specific intent to violate it. In addition, the government may assert that a claim including items or services resulting from a violation of the federal Anti-Kickback Statute constitutes a false or fraudulent claim for purposes of the civil False Claims Act. Due to the breadth of these laws, the narrowness of statutory exceptions and regulatory safe harbors available, and the range of interpretations to which they are subject, it is possible that some of our current or future practices might be challenged under one or more of these laws, including, without limitation, our proposed Subscription Model, and our advisory, consulting and royalty agreements with certain physicians who receive compensation, in part, in the form of stock or stock options.|
|•||The federal civil False Claims Act prohibits, among other things, any person from knowingly presenting, or causing to be presented, a false or fraudulent claim for payment of government funds, or knowingly making, using, or causing to be made or used, a false record or statement material to an obligation to pay money to the government or knowingly concealing or knowingly and improperly avoiding, decreasing, or concealing an obligation to pay money to the federal government. In recent years, several healthcare companies have faced enforcement actions under the federal False Claims Act for, among other things, allegedly providing free product to customers with the expectation that the customers would bill federal programs for the product or causing false claims to be submitted because of the company’s marketing the product for unapproved, and thus non-reimbursable, uses. False Claims Act liability is potentially significant in the healthcare industry because the statute provides for treble damages and mandatory penalties of tens of thousands of dollars per false claim or statement. Healthcare companies also are subject to other federal false claims laws, including, among others, federal criminal healthcare fraud and false statement statutes that extend to non-government health benefit programs.|
|•||The Health Insurance Portability and Accountability Act of 1996 (HIPAA), as amended by the Health Information Technology for Economic and Clinical Health Act of 2009 (HITECH), imposes criminal and civil liability for knowingly and willfully executing a scheme to defraud any healthcare benefit program, or knowingly and willfully falsifying, concealing or covering up a material fact or making any materially false statement in connection with the delivery of or payment for healthcare benefits, items or services. In addition, HIPAA, as amended by HITECH, and their respective implementing regulations impose obligations, including mandatory contractual terms, on covered healthcare providers, health plans, as well as their business associates, with respect to safeguarding the privacy, security and transmission of individually identifiable health information.|
|•||The Physician Payment Sunshine Act, implemented as the Open Payments program, requires manufacturers of certain products reimbursed by Medicare, Medicaid, or the Children’s Health|
Insurance Program to track and report to the federal government payments and transfers of value that they make to physicians and teaching hospitals, certain other healthcare professionals beginning in 2022, group purchasing organizations, and ownership interests held by physicians and their families, and provides for public disclosures of these data. Manufacturers are required to submit annual reports to the government and failure to do so may result in civil monetary penalties for all payments, transfers of value and ownership or investment interests not reported in an annual submission, and may result in liability under other federal laws and regulations.
|•||Many states have adopted laws and regulations analogous to the federal laws cited above, including state anti-kickback and false claims laws, which may apply to items or services reimbursed under Medicaid and other state programs or, in several states, regardless of the payer. Several states have enacted legislation requiring medical device companies to, among other things, establish marketing compliance programs; file periodic reports with the state, including reports on gifts and payments to individual health care providers; make periodic public disclosures on sales, marketing, pricing, clinical trials and other activities; and/or register their sales representatives. Some states prohibit specified sales and marketing practices, including the provision of gifts, meals, or other items to certain health care providers.|
Efforts to ensure that our business arrangements with third parties will comply with applicable healthcare laws and regulations involve substantial costs. Additionally, it is possible that governmental authorities will conclude that our business practices may not comply with current or future statutes, regulations or case law involving applicable fraud and abuse or other healthcare laws and regulations. If our operations are found to be in violation of any of these laws or any other governmental regulations that may apply to us, we may be subject to significant civil, criminal and administrative penalties, damages, fines, exclusion from government funded healthcare programs, such as Medicare and Medicaid, and the curtailment or restructuring of our operations. Exclusion, suspension and debarment from government funded healthcare programs would significantly impact our ability to commercialize, sell or distribute any product. If any of the physicians or other providers or entities with whom we expect to do business are found not to be in compliance with applicable laws, they may be subject to criminal, civil or administrative sanctions, including exclusions from government funded healthcare programs.
Changes in laws or regulations relating to data protection, or any actual or perceived failure by us to comply with such laws and regulations or our privacy policies, could materially and adversely affect our business or could lead to government enforcement actions and significant penalties against us, and adversely impact our operating results.
We expect to receive health information and other highly sensitive or confidential information and data of patients and other third parties (e.g., healthcare providers who refer patients for scans), which we expect to compile and analyze. Collection and use of this data might raise privacy and data protection concerns, which could negatively impact our business. There are numerous federal, state and international laws and regulations regarding privacy, data protection, information security, and the collection, storing, sharing, use, processing, transfer, disclosure, and protection of personal information and other data, and the scope of such laws and regulations may change, be subject to differing interpretations, and may be inconsistent among countries and regions we intend to operate in (e.g., the United States, the European Union and Israel), or conflict with other laws and regulations. The regulatory framework for privacy and data protection worldwide is, and is likely to remain for the foreseeable future, uncertain and complex, and this or other actual or alleged obligations may be interpreted and applied in a manner that we may not anticipate or that is inconsistent from one jurisdiction to another and may conflict with other rules or practices including ours. Further, any significant change to applicable laws, regulations, or industry practices regarding the collection, use, retention, security, or disclosure of data, or their interpretation, or any changes regarding the manner in which the consent of relevant users for the collection, use, retention, or disclosure of such data must be obtained, could increase our costs and require us to modify our services and candidate products, possibly in a material manner, which we may be unable to complete, and may limit our ability to store and process patients data or develop new services and features.
In particular, we will be subject to U.S. data protection laws and regulations (i.e., laws and regulations that address privacy and data security) at both the federal and state levels. The legislative and regulatory landscape for data protection continues to evolve, and in recent years there has been an increasing focus on privacy and data security issues. Numerous federal and state laws, including state data breach notification laws, state health
information privacy laws, and federal and state consumer protection laws, govern the collection, use, and disclosure of health-related and other personal information. Failure to comply with such laws and regulations could result in government enforcement actions and create liability for us (including the imposition of significant civil or criminal penalties), private litigation and/or adverse publicity that could negatively affect our business. For instance, California enacted the California Consumer Privacy Act (CCPA) on June 28, 2018, which took effect on January 1, 2020. The CCPA creates individual privacy rights for California consumers and increases the privacy and security obligations of entities handling certain personal data. The CCPA provides for civil penalties for violations, as well as a private right of action for data breaches that is expected to increase data breach litigation. The CCPA may increase our compliance costs and potential liability, and many similar laws have been proposed at the federal level and in other states.
In addition, we expect to obtain health information that are subject to privacy and security requirements under HITECH and its implementing regulations. The Privacy Standards and Security Standards under HIPAA establish a set of standards for the protection of individually identifiable health information by health plans, health care clearinghouses and certain health care providers, referred to as Covered Entities, and the business associates with whom Covered Entities enter into service relationships pursuant to which individually identifiable health information may be exchanged. Notably, whereas HIPAA previously directly regulated only Covered Entities, HITECH makes certain of HIPAAs privacy and security standards also directly applicable to Covered Entities business associates. As a result, both Covered Entities and business associates are now subject to significant civil and criminal penalties for failure to comply with Privacy Standards and Security Standards. As part of our normal operations, we expect to collect, process and retain personal identifying information regarding patients, including as a business associate of Covered Entities, so we expect to be subject to HIPAA, including changes implemented through HITECH, and we could be subject to criminal penalties if we knowingly obtain or disclose individually identifiable health information in a manner that is not authorized or permitted by HIPAA. A data breach affecting sensitive personal information, including health information, also could result in significant legal and financial exposure and reputational damages that could potentially have an adverse effect on our business.
HIPAA requires Covered Entities (like many of our potential customers) and business associates, like us, to develop and maintain policies and procedures with respect to protected health information that is used or disclosed, including the adoption of administrative, physical and technical safeguards to protect such information. HITECH expands the notification requirement for breaches of patient-identifiable health information, restricts certain disclosures and sales of patient-identifiable health information and provides for civil monetary penalties for HIPAA violations. HITECH also increased the civil and criminal penalties that may be imposed against Covered Entities and business associates and gave state attorneys general new authority to file civil actions for damages or injunctions in federal courts to enforce HIPAA and its implementing regulations and seek attorneys fees and costs associated with pursuing federal civil actions. Additionally, certain states have adopted comparable privacy and security laws and regulations, some of which may be more stringent than HIPAA.
Internationally, many jurisdictions have or are considering enacting privacy or data protection laws or regulations relating to the collection, use, storage, transfer, disclosure and/or other processing of personal data, as well as certification requirements for the hosting of health data specifically. Such laws and regulations may include data hosting, data residency or data localization requirements (which generally require that certain types of data collected within a certain country be stored and processed within that country), data export restrictions, international transfer laws (which prohibit or impose conditions upon the transfer of such data from one country to another), or may require companies to implement privacy or data protection and security policies, enable users to access, correct and delete personal data stored or maintained by such companies, inform individuals of security breaches that affect their personal data or obtain individuals consent to use their personal data. For example, European legislators adopted the European Unions General Data Protection Regulation (2016/679) (GDPR), which became effective on May 25, 2018, and are now in the process of finalizing the ePrivacy Regulation to replace the European ePrivacy Directive (Directive 2002/58/EC as amended by Directive 2009/136/EC). The GDPR, supplemented by national laws and further implemented through binding guidance from the European Data Protection Board, imposes more stringent European Union data protection requirements and provides for significant penalties for noncompliance. Further, the United Kingdoms initiating a
process to leave the European Union has created uncertainty with regard to the regulation of data protection in the United Kingdom. In particular, the United Kingdom has brought the GDPR into domestic law with the Data Protection Act 2018 which will remain in force, even if and when the United Kingdom leaves the European Union.
Virtually every jurisdiction in which we expect to operate has established its own data security and privacy legal framework with which we must, and our target customers will need to, comply, including the rules and regulation mentioned above. We may also need to comply with varying and possibly conflicting privacy laws and regulations in other jurisdictions. As a result, we could face regulatory actions, including significant fines or penalties, adverse publicity and possible loss of business.
While we are preparing to implement various measures intended to enable us to comply with applicable privacy or data protection laws, regulations and contractual obligations, these measures may not always be effective and do not guarantee compliance. Any failure or perceived failure by us to comply with our contractual or legal obligations or regulatory requirements relating to privacy, data protection, or information security may result in governmental investigations or enforcement actions, litigation, claims, or public statements against us by consumer advocacy groups or others and could result in significant liability, cause our customers, partners or patients to lose trust in us, and otherwise materially and adversely affect our reputation and business. Furthermore, the costs of compliance with, and other burdens imposed by, the laws, regulations, and policies that are applicable to the businesses of our customers or partners may limit the adoption and use of, and reduce the overall demand for, our products and services. Additionally, if third parties we work with violate applicable laws, regulations, or agreements, such violations may put the data we have received at risk, could result in governmental investigations or enforcement actions, fines, litigation, claims, or public statements against us by consumer advocacy groups or others and could result in significant liability, cause our customers, partners or patients to lose trust in us, and otherwise materially and adversely affect our reputation and business. Further, public scrutiny of, or complaints about, technology companies or their data handling or data protection practices, even if unrelated to our business, industry or operations, may lead to increased scrutiny of technology companies, including us, and may cause government agencies to enact additional regulatory requirements, or to modify their enforcement or investigation activities, which may increase our costs and risks.
If we do not obtain and maintain international regulatory registrations, clearances or approvals for our products, we will be unable to market and sell our products outside of the United States.
Sales of our products outside of the United States are subject to foreign regulatory requirements that vary widely from country to country. Approval procedures vary among countries and can involve additional testing. The time required to obtain approval outside of the United States may differ substantially from that required to obtain FDA approval. In addition, the FDA regulates exports of medical devices from the United States. While the regulations of some countries may not impose barriers to marketing and selling our products or only require notification, others require that we obtain the clearance or approval of a specified regulatory body. Complying with foreign regulatory requirements, including obtaining registrations, clearances or approvals, can be expensive and time-consuming, and we may not receive regulatory clearances or approvals in each country in which we plan to market our products or we may be unable to do so on a timely basis. The time required to obtain registrations, clearances or approvals, if required by other countries, may be longer than that required for FDA clearance or approval, and requirements for such registrations, clearances or approvals may significantly differ from FDA requirements. If we modify our products, we may need to apply for additional regulatory clearances or approvals before we are permitted to sell the modified product. In addition, we may not continue to meet the quality and safety standards required to maintain the authorizations that we have received. If we are unable to maintain our authorizations in a particular country, we will no longer be able to sell the applicable product in that country.
Regulatory clearance or approval by the FDA does not ensure registration, clearance or approval by regulatory authorities in other countries, and registration, clearance or approval by one or more foreign regulatory authorities does not ensure registration, clearance or approval by regulatory authorities in other foreign countries or by the FDA. However, a failure or delay in obtaining registration or regulatory clearance or approval in one country may have a negative effect on the regulatory process in others.
Legislative or regulatory reforms in the United States or the EU may make it more difficult and costly for us to obtain regulatory clearances or approvals for our products or to manufacture, market or distribute our products after clearance or approval is obtained.
From time to time, legislation is drafted and introduced in Congress that could significantly change the statutory provisions governing the regulation of medical devices. In addition, the FDA may change its clearance and approval policies, adopt additional regulations or revise existing regulations, or take other actions, which may prevent or delay approval or clearance of our future products under development or impact our ability to modify our currently cleared products on a timely basis. Over the last several years, the FDA has proposed reforms to its 510(k) clearance process, and such proposals could include increased requirements for clinical data and a longer review period, or could make it more difficult for manufacturers to utilize the 510(k) clearance process for their products. For example, in November 2018, FDA officials announced forthcoming steps that the FDA intends to take to modernize the premarket notification pathway under Section 510(k) of the FDCA. Among other things, the FDA announced that it planned to develop proposals to drive manufacturers utilizing the 510(k) pathway toward the use of newer predicates. These proposals included plans to potentially sunset certain older devices that were used as predicates under the 510(k) clearance pathway, and to potentially publish a list of devices that have been cleared on the basis of demonstrated substantial equivalence to predicate devices that are more than 10 years old. In May 2019, the FDA solicited public feedback on these proposals. The FDA requested public feedback on whether it should consider certain actions that might require new authority, such as whether to sunset certain older devices that were used as predicates under the 510(k) clearance pathway. These proposals have not yet been finalized or adopted, and the FDA may work with Congress to implement such proposals through legislation. Accordingly, it is unclear the extent to which any proposals, if adopted, could impose additional regulatory requirements on us that could delay our ability to obtain new 510(k) clearances, increase the costs of compliance, or restrict our ability to maintain our current clearances, or otherwise create competition that may negatively affect our business.
More recently, in September 2019, the FDA finalized guidance describing an optional safety and performance based premarket review pathway for manufacturers of certain, well-understood device types to demonstrate substantial equivalence under the 510(k) clearance pathway by showing that such device meets objective safety and performance criteria established by the FDA, thereby obviating the need for manufacturers to compare the safety and performance of their medical devices to specific predicate devices in the clearance process. The FDA intends to develop and maintain a list device types appropriate for the safety and performance based pathway and will continue to develop product-specific guidance documents that identify the performance criteria for each such device type, as well as the testing methods recommended in the guidance documents, where feasible. The FDA may establish performance criteria for classes of devices for which we or our competitors seek or currently have received clearance, and it is unclear the extent to which such performance standards, if established, could impact our ability to obtain new 510(k) clearances or otherwise create competition that may negatively affect our business.
In addition, FDA regulations and guidance are often revised or reinterpreted by the FDA in ways that may significantly affect our business and our products. Any new statutes, regulations or revisions or reinterpretations of existing regulations may impose additional costs or lengthen review times of any future products or make it more difficult to obtain clearance or approval for, manufacture, market or distribute our products. We cannot determine what effect changes in regulations, statutes, legal interpretation or policies, when and if promulgated, enacted or adopted may have on our business in the future. Such changes could, among other things, require: additional testing prior to obtaining clearance or approval; changes to manufacturing methods; recall, replacement or discontinuance of our products; or additional record keeping.
The FDAs and other regulatory authorities policies may change and additional government regulations may be promulgated that could prevent, limit or delay regulatory clearance or approval of our future products. We cannot predict the likelihood, nature or extent of government regulation that may arise from future legislation or administrative action, either in the United States or abroad. For example, certain policies of the Trump administration may impact our business and industry. Namely, the Trump administration has taken several executive actions, including the issuance of a number of Executive Orders, that could impose significant burdens on, or otherwise materially delay, FDAs ability to engage in routine oversight activities such as implementing statutes through rulemaking, issuance of guidance, and review and approval of marketing applications. It is difficult to predict how these executive actions will be implemented, and the extent to which they will impact the FDAs ability to exercise its regulatory authority. If these executive actions impose restrictions on the FDAs
ability to engage in oversight and implementation activities in the normal course, our business may be negatively impacted. If we are slow or unable to adapt to changes in existing requirements or the adoption of new requirements or policies, or if we are not able to maintain regulatory compliance, we may lose any marketing approval or clearance that we may have obtained and we may not achieve or sustain profitability.
On April 5, 2017, the European Parliament passed the Medical Devices Regulation (Regulation 2017/745), which repeals and replaces the EU Medical Devices Directive. Unlike directives, which must be implemented into the national laws of the EEA member states, the regulations would be directly applicable, i.e., without the need for adoption of EEA member state laws implementing them, in all EEA member states and are intended to eliminate current differences in the regulation of medical devices among EEA member States. The Medical Devices Regulation, among other things, is intended to establish a uniform, transparent, predictable and sustainable regulatory framework across the EEA for medical devices and ensure a high level of safety and health while supporting innovation.
The Medical Devices Regulation will, however, only become applicable three years after publication (in 2020). Once applicable, the new regulations will among other things:
|•||strengthen the rules on placing devices on the market and reinforce surveillance once they are available;|
|•||establish explicit provisions on manufacturers’ responsibilities for follow-up regarding the quality, performance and safety of devices placed on the market;|
|•||improve the traceability of medical devices throughout the supply chain to the end-user or patient through a unique identification number;|
|•||set up a central database to provide patients, healthcare professionals and the public with comprehensive information on products available in the EU; and|
|•||strengthened rules for the assessment of certain high-risk devices, which may have to undergo an additional check by experts before they are placed on the market.|
These modifications may have an effect on the way we conduct our business in the EEA.
Healthcare reform laws could adversely affect our products and financial condition.
During the past several years, the U.S. healthcare industry has been subject to an increase in governmental regulation at both the federal and state levels. Efforts to control healthcare costs, including limiting access to care, alternative delivery models and changes in the methods used to determine reimbursement scenarios and rates, are ongoing at the federal and state government levels.
In March 2010, former President Obama signed into law the Patient Protection and Affordable Care Act, and the Health Care and Education Reconciliation Act of 2010 (collectively, the ACA), which included measures that significantly changed the way healthcare is financed by both governmental and private insurers. While a primary goal of these healthcare reform efforts was to expand coverage to more individuals, it also involved additional regulatory mandates and other measures designed to constrain medical costs. The ACA significantly impacts the medical device industry. Among other things, the ACA:
|•||Imposes an annual excise tax of 2.3% on any entity that manufactures or imports medical devices offered for sale in the United States, which, through a series of legislative amendments, was suspended, effective January 1, 2016 and subsequently repealed altogether on December 20, 2019;|
|•||Establishes a new Patient-Centered Outcomes Research Institute to oversee and identify priorities in comparative clinical effectiveness research in an effort to coordinate and develop such research; and|
|•||Implements Medicare payment system reforms including a national pilot program on payment bundling to encourage hospitals, physicians and other providers to improve the coordination, quality and efficiency of certain healthcare services through bundled payment models.|
In addition, the ACA and related healthcare reform laws, regulations and initiatives have significantly increased regulation of managed care plans and decreased reimbursement under Medicare managed care. Moreover, to alleviate
budget shortfalls, states have reduced or frozen payments to Medicaid managed care plans. We cannot accurately predict the complete impact of these healthcare reform initiatives, but they could lead to a decreased demand for medical devices and other outcomes that could adversely impact our business and financial results.
Some of the provisions of the ACA have yet to be fully implemented, and certain provisions have been subject to judicial and Congressional challenges. In addition, there have been efforts by the Trump administration to repeal or replace certain aspects of the ACA and to alter the implementation of the ACA and related laws. For example, the Tax Cuts and Jobs Act enacted on December 22, 2017, or TCJA, eliminated the shared responsibility payment for individuals who fail to maintain minimum essential coverage under section 5000A of the Internal Revenue Code of 1986, commonly referred to as the individual mandate, effective January 1, 2019. On December 14, 2018, a U.S. District Court Judge in the Northern District of Texas, or the Texas District Court Judge, ruled that the individual mandate is a critical and inseverable feature of the ACA, and therefore, because it was repealed as part of the Tax Cuts and Jobs Act, the remaining provisions of the ACA are invalid as well. This decision was subsequently appealed, and on December 18, 2019, the U.S. Court of Appeals for the Fifth Circuit affirmed the decision of the district court that the individual mandate, as amended by the TCJA, was unconstitutional. The Fifth Circuit remanded the case to the district court to consider a remedy, including to consider and explain which provisions of the ACA are inseverable and invalid. It is unclear how this litigation, including all future hearings and appeals, and other efforts to challenge, repeal or replace the ACA, or portions thereof, will affect our future products or our business. It is possible that the ACA, as currently enacted or as it may be amended in the future, and other healthcare reform measures that may be adopted in the future, could have an adverse effect on our industry generally and on our ability to commercialize our future products and achieve profitability.
Changes in funding for the FDA and other government agencies could hinder their ability to hire and retain key leadership and other personnel, or otherwise prevent new products and services from being developed or commercialized in a timely manner, which could negatively impact our business.
The ability of the FDA to review and approve new products can be affected by a variety of factors, including government budget and funding levels, ability to hire and retain key personnel and accept the payment of user fees, and statutory, regulatory, and policy changes. Average review times at the agency have fluctuated in recent years as a result. In addition, government funding of other government agencies that fund research and development activities is subject to the political process, which is inherently fluid and unpredictable.
Disruptions at the FDA and other agencies may also slow the time necessary for new devices to be reviewed and/or approved or cleared by necessary government agencies, which would adversely affect our business. For example, over the last several years, including for 35 days beginning on December 22, 2018, the U.S. government has shut down several times and certain regulatory agencies, such as the FDA, have had to furlough critical FDA employees and stop critical activities. If a prolonged government shutdown occurs, it could significantly impact the ability of the FDA to timely review and process our regulatory submissions, which could have a material adverse effect on our business.
Risks Related to Employee Matters
Under applicable employment laws, we may not be able to enforce covenants not to compete and therefore may be unable to prevent our competitors from benefiting from the expertise of some of our former employees.
Our employment agreements generally include covenants not to compete. These agreements prohibit our employees, if they cease working for us, from competing directly with us or working for our competitors for a limited period. We may be unable to enforce these agreements under the laws of the jurisdictions in which our employees work at all or for a sufficient duration of time to prevent members of our management team from competing with us. For example, Israeli courts have required employers seeking to enforce covenants not to compete to demonstrate that the competitive activities of a former employee will harm one of a limited number of material interests of the employer, such as the secrecy of a companys confidential commercial information or the protection of its intellectual property. In Israel, if we cannot demonstrate that such an interest will be harmed, we may be unable to prevent our competitors from benefiting from the expertise of our former employees or consultants and our competitiveness may be diminished.
We may not be able to attract and retain the highly skilled employees we need to support our planned growth.
To continue to execute our business and our growth plan, we must attract and retain highly qualified personnel. Competition for these personnel is intense. We may not be successful in attracting and retaining
qualified personnel. If we fail to attract new personnel or fail to retain and motivate our current personnel, our business, financial condition, results of operations and future growth prospects could be severely harmed.
Risks Related to this Offering and Owning Our Ordinary Shares
Our share price may be volatile, and you may lose all or part of your investment.
The initial public offering price for our shares will be determined by negotiations between us and representatives of the underwriters based on several factors. This price may vary from the market price of our shares after this offering and the price of our ordinary shares may decline. You may be unable to sell your shares at or above the initial offering price. The market price for our shares may be volatile and subject to wide fluctuations in response to factors including the following:
|•||actual or anticipated fluctuations in results of operations;|
|•||actual or anticipated changes in our growth rate relative to our competitors, as well as announcements by us or our competitors of significant business developments, changes in relationships with our target customers, manufacturers or suppliers, acquisitions or expansion plans;|
|•||failure to meet or exceed financial estimates and projections of the investment community or that we provide to the public, as well as variance in our financial performance from the expectations of market analysts;|
|•||issuance of new or updated research or reports by securities analysts;|
|•||share price and volume fluctuations attributable to inconsistent trading volume levels of our shares;|
|•||additions or departures of key management or other personnel;|
|•||our involvement in litigation;|
|•||disputes or other developments related to proprietary rights, including patents, litigation matters, and our ability to obtain patent protection for our technology;|
|•||announcement or expectation of additional debt or equity financing efforts;|
|•||sales of our ordinary shares or other securities by us, our insiders or our other shareholders, or the perception that these sales may occur in the future;|
|•||the trading volume of our ordinary shares;|
|•||market conditions in our industry;|
|•||changes in the estimation of the future size and growth rate of our markets; and|
|•||general economic, market or political conditions in the United States or elsewhere.|
In particular, the market prices of pre-commercial-stage companies like ours have been highly volatile due to factors, including, but not limited to:
|•||our ability to develop and commercialize our technology and future products or services;|
|•||developments or disputes concerning our product’s intellectual property rights;|
|•||our or our competitors’ technological innovations;|
|•||fluctuations in the valuation of companies perceived by investors to be comparable to us;|
|•||announcements by us or our competitors of significant contracts, acquisitions, strategic partnerships, joint ventures, capital commitments, new technologies or patents;|
|•||failure to complete significant transactions or collaborate with vendors in manufacturing our product; and|
|•||proposals for legislation that would place restrictions on the price of medical therapies.|
These and other market and industry factors may cause the market price and demand for our ordinary shares to fluctuate substantially, regardless of our actual operating performance, which may limit or prevent investors from readily selling their ordinary shares and may otherwise negatively affect the liquidity of our ordinary shares. In addition, the stock market in general, and Nasdaq Capital Markets and emerging growth companies in
particular, have experienced extreme price and volume fluctuations that have often been unrelated or disproportionate to the operating performance of these companies. Such broad market fluctuations, and other factors (such as variations in quarterly and yearly operating results, general trends in the medical imaging industry, and changes in state, federal or other applicable regulations affecting us and our industry) may adversely affect the market price of our ordinary shares, if a market for them develops.
In the past, when the market price of shares has been volatile, holders of those shares have instituted securities class action litigation against the company that issued the shares. If any of our shareholders brought a lawsuit against us, we could incur substantial costs defending the lawsuit. Such a lawsuit could also divert resources and the time and attention of our management.
Prior to the completion of our initial public offering, there was no public trading market for our ordinary shares.
The offering under this prospectus is an initial public offering of our ordinary shares. Prior to the closing of the offering, there was no public market for our ordinary shares. While we plan to list our ordinary shares on the Nasdaq Capital Market, our listing application may not be approved. If our application to the Nasdaq Capital Market is not approved or we otherwise determine that we will not be able to secure the listing of the ordinary shares on the Nasdaq Capital Market, we will not complete the offering. In addition, an active trading market may not develop following the closing of this offering or, if developed, may not be sustained. The lack of an active market may impair your ability to sell your shares at the time you wish to sell them or at a price that you consider reasonable. An inactive market may also impair our ability to raise capital by selling ordinary shares and may impair our ability to acquire other companies by using our shares as consideration.
We are an emerging growth company under the JOBS Act and we cannot be certain if the reduced disclosure requirements applicable to emerging growth companies will make our ordinary shares less attractive to investors.
We are an emerging growth company, as defined in the JOBS Act, and for so long as we continue to be an emerging growth company we may take advantage of certain exemptions from various reporting requirements that are applicable to other public companies that are not emerging growth companies including, but not limited to, not being required to comply with the auditor attestation requirements of section 404 of the Sarbanes-Oxley Act, reduced disclosure obligations regarding executive compensation in our periodic reports and proxy statements, and exemptions from the requirements of holding a non-binding advisory vote on executive compensation and shareholder approval of any golden parachute payments not previously approved. In addition, under the JOBS Act, emerging growth companies can delay adopting new or revised financial accounting standards until such time as those standards apply to private companies. We have elected to opt out of this provision and, as a result, we will comply with new or revised accounting standards as required when they are adopted for public companies.
Our status as an emerging growth company under the JOBS Act may make it more difficult to raise capital as and when we need it.
Because of the exemptions from various reporting requirements provided to us as an emerging growth company, we may be less attractive to investors and it may be difficult for us to raise additional capital as and when we need it. Investors may be unable to compare our business with other companies in our industry if they believe that our reporting is not as transparent as the reporting of other companies in our industry. If we are unable to raise additional capital as and when we need it, our financial condition and results of operations may be materially and adversely affected.
We will remain an emerging growth company until the earliest of: (i) the last day of our fiscal year during which we have total annual gross revenue of at least $1.07 billion; (ii) the last day of our fiscal year following the fifth anniversary of the completion of this offering; (iii) the date on which we have, during the previous three-year period, issued more than $1.0 billion in non-convertible debt; or (iv) the date on which we are deemed to be a large accelerated filer under the Exchange Act. Once we cease to be an emerging growth company, we will not be entitled to the exemptions provided to emerging growth companies under the JOBS Act.
As a foreign private issuer, we are exempt from certain requirements that apply to domestic issuers and we are permitted to follow certain home country corporate governance practices instead of applicable SEC and Nasdaq requirements, which may result in less protection than is accorded to shareholders under rules applicable to domestic issuers.
Upon the closing of this offering, we will report under the Exchange Act as a non-U.S. company with foreign private issuer status. Because we qualify as a foreign private issuer under the Exchange Act, we are exempt from certain provisions of the Exchange Act that are applicable to U.S. domestic public companies, including (1) the sections of the Exchange Act regulating the solicitation of proxies, consents or authorizations in respect of a security registered under the Exchange Act, (2) the sections of the Exchange Act requiring insiders to file public reports of their share ownership and trading activities and liability for insiders who profit from trades made in a short period of time and (3) the rules under the Exchange Act requiring the filing with the SEC of quarterly reports on Form 10-Q containing unaudited financial and other specified information, although we intend to furnish comparable quarterly information on Form 6-K. In addition, foreign private issuers are not required to file their annual report on Form 20-F until 120 days after the end of each fiscal year, while U.S. domestic issuers that are accelerated filers are required to file their annual report on Form 10-K within 75 days after the end of each fiscal year and U.S. domestic issuers that are large accelerated filers are required to file their annual report on Form 10-K within 60 days after the end of each fiscal year. Foreign private issuers are also exempt from Regulation FD, which is intended to prevent issuers from making selective disclosures of material information.
In addition, as a foreign private issuer, we will be permitted to follow certain home country corporate governance practices instead of those otherwise required under the listing rules of the Nasdaq Stock Market for domestic issuers. For instance, we may follow home country practice in Israel with regard to, among other things, composition of the board of directors, director nomination procedure, approval of compensation of officers, and quorum at shareholders meetings. For example, under Israeli law, as currently applicable to us, there is no requirement for a majority of our directors to be independent. In addition, we may follow our home country law, instead of the listing rules of the Nasdaq Stock Market, which require that we obtain shareholder approval for certain dilutive events, such as for the establishment or amendment of certain equity based compensation plans, an issuance that will result in a change of control of the company, certain transactions other than a public offering involving issuances of a 20% or more interest in the company and certain acquisitions of the stock or assets of another company.
As a result of all of the above, you may not have the same protections afforded to shareholders of a company that is not a foreign private issuer.
We may lose our foreign private issuer status which would then require us to comply with the Exchange Acts domestic reporting regime and cause us to incur significant legal, accounting and other expenses.
As discussed above, we are a foreign private issuer and therefore we are not required to comply with all of the periodic disclosure and current reporting requirements of the Exchange Act applicable to U.S. domestic issuers. We will remain a foreign private issuer until our board determines that we no longer meet the qualification set forth in Securities Act Rule 405 and Exchange Act Rule 3b-4, with such determinations to be made on an annual basis as of the end of our second fiscal quarter. In order to maintain our current status as a foreign private issuer, either (a) a majority of our ordinary shares must be either directly or indirectly owned of record by non-residents of the United States or (b)(i) a majority of our executive officers or directors must not be U.S. citizens or residents, (ii) more than 50 percent of our assets cannot be located in the United States and (iii) our business must be administered principally outside the United States. If we lose this status, we would be required to comply with the Exchange Act reporting and other requirements applicable to U.S. domestic issuers, which are more detailed and extensive than the requirements for foreign private issuers. We may also be required to make changes in our corporate governance practices in accordance with various SEC and Nasdaq rules. The regulatory and compliance costs to us under U.S. securities laws if we are required to comply with the reporting requirements applicable to a U.S. domestic issuer may be significantly higher than the costs we would incur as a foreign private issuer. As a result, we expect that a loss of foreign private issuer status would increase our legal and financial compliance costs and would make some activities highly time consuming and costly. We also expect that if we were required to comply with the rules and regulations applicable to U.S. domestic issuers, it
would make it more difficult and expensive for us to obtain director and officer liability insurance, and we may be required to accept reduced coverage or incur substantially higher costs to obtain coverage. These rules and regulations could also make it more difficult for us to attract and retain qualified members of our board of directors.
We have not paid dividends in the past and have no immediate plans to pay dividends.
We plan to reinvest all of our future earnings, to the extent we have earnings, in order to develop and commercialize our technology and products and to cover operating costs, finance operations and to otherwise become and remain competitive. We have never declared or paid any dividends on our ordinary shares and we do not plan to pay any cash dividends with respect to our securities in the foreseeable future. As we are a development-stage company with limited operating history, we may not be able to generate, at any time, sufficient surplus cash that would be available for distribution to the holders of our ordinary shares as a dividend. Therefore, you should not expect to receive cash dividends on the ordinary shares we are offering. Consequently, investors may need to rely on sales of their ordinary shares after price appreciation, which may never occur, as the only way to realize any future gains on their investment. In addition, the Companies Law imposes restrictions on our ability to declare and pay dividends. See Description of Share Capital—Dividend and Liquidation Rights for additional information.
We will incur significant increased costs as a result of becoming a public company that reports to the Securities and Exchange Commission and our management will be required to devote substantial time to meet compliance obligations.
As a public company reporting to the SEC, we will incur significant legal, insurance, director compensation, accounting and other expenses that we did not incur as a private company. We will be subject to reporting requirements of the Exchange Act and the Sarbanes-Oxley Act, as well as rules subsequently implemented by the SEC that impose significant requirements on public companies, including requiring establishment and maintenance of effective disclosure and financial controls and changes in corporate governance practices. In addition, the Dodd-Frank Wall Street Reform and Consumer Protection Act (the Dodd-Frank Act) impose various other requirements on public companies. There are significant corporate governance and executive compensation-related provisions in the Dodd-Frank Act that are expected to increase our legal and financial compliance costs, make some activities more difficult, time-consuming or costly and may also place undue strain on our personnel, systems and resources. Our management and other personnel will need to devote a substantial amount of time to these new compliance initiatives. In addition, we expect these rules and regulations to make it more difficult and more expensive for us to obtain director and officer liability insurance, and we may be required to accept reduced policy limits and coverage or incur substantially higher costs to obtain the same or similar coverage. As a result, it may be more difficult and expensive for us to attract and retain qualified people to serve on our board of directors, our board committees or as executive officers.
We also anticipate that we will incur costs associated with corporate governance requirements, including requirements under rules implemented by the SEC and the Nasdaq Capital Market, and provisions of Israeli corporate law applicable to public companies. We expect that these rules and regulations will increase our legal and financial compliance costs, introduce new costs such as investor relations and stock exchange listing fees, and will make some activities more time-consuming and costly. Our board and other personnel will need to devote a substantial amount of time to these initiatives. We are currently evaluating and monitoring developments with respect to these rules, and we cannot estimate the amount of additional costs we may incur or the timing of such costs.
As an emerging growth company, as defined in the JOBS Act, we may take advantage of certain temporary exemptions from various reporting requirements, including, but not limited to, not being required to comply with the auditor attestation requirements of Section 404 of the Sarbanes-Oxley Act (and the rules and regulations of the SEC thereunder). When these exemptions cease to apply, we expect to incur additional expenses and devote increased management effort toward ensuring compliance with them. We cannot estimate the amount of additional costs we may incur as a result of becoming a public company or the timing of such costs.
Pursuant to Section 404 of the Sarbanes-Oxley Act and the related rules adopted by the SEC and the Public Company Accounting Oversight Board, starting with the second annual report that we file with the SEC after the closing of this offering, our management will be required to report on the effectiveness of our internal control over financial reporting. In addition, once we no longer qualify as an emerging growth company under the JOBS Act and lose the ability to rely on the exemptions related thereto discussed above and depending on our status as per Rule 12b-2 of the Exchange Act, our independent registered public accounting firm may also need to attest to the effectiveness of our internal control over financial reporting under Section 404. We have not yet commenced the process of determining whether our existing internal controls over financial reporting systems are compliant with Section 404. This process will require the investment of substantial time and resources, including by our chief financial officer and other members of our senior management. As a result, this process may divert internal resources and take a significant amount of time and effort to complete. In addition, the outcome of this determination may be unexpected and we may need to implement remedial actions in order to implement effective controls over financial reporting. The determination and any remedial actions required could result in us incurring additional costs that we did not anticipate, including the hiring of outside consultants. Irrespective of compliance with Section 404, any failure of our internal controls could have a material adverse effect on our stated results of operations and harm our reputation. As a result, we may experience higher than anticipated operating expenses, as well as higher independent auditor fees during and after the implementation of these changes. If we are unable to implement any of the required changes to our internal control over financial reporting effectively or efficiently or are required to do so earlier than anticipated, it could adversely affect our operations, financial reporting and/or results of operations and could result in an adverse opinion on internal controls from our independent auditors.
Assuming a market for our ordinary shares develops, shares eligible for future sale may adversely affect the market for our ordinary shares.
From time to time after we have been subject to the reporting requirements of section 13 or section 15(d) of the Exchange Act for at least 90 days, certain of our shareholders may be eligible to sell all or some of their ordinary shares by means of ordinary brokerage transactions in the open market pursuant to Rule 144, promulgated under the Securities Act, subject to certain limitations. In general, pursuant to Rule 144, non-affiliate shareholders may sell freely after six months subject only to the current public information requirement (which disappears after one year). Of the ordinary shares expected to be outstanding following completion of the offering, approximately shares will be held by non-affiliates and will be freely tradable without restriction pursuant to Rule 144, although all but of such shares will be subject to either a or lock-up. In addition, certain shareholders will have the ability to cause us to register the resale of their shares under the Registration Rights Agreement or the terms of certain warrants. See Description of Share Capital—Registration Rights for a description of the registration rights.
Any substantial sale of our ordinary shares pursuant to Rule 144 or pursuant to any resale prospectus (including sales by investors of securities acquired in connection with this offering) may have a material adverse effect on the market price of our ordinary shares.
We may allocate the net proceeds from this offering in ways that differ from the estimates discussed in the section titled Use of Proceeds and with which you may not agree.
The allocation of net proceeds of the offering set forth in the Use of Proceeds section below represents our estimates based upon our current plans and assumptions regarding industry and general economic conditions, and our future revenues and expenditures. The amounts and timing of our actual expenditures will depend on numerous factors, including market conditions, cash generated by our operations, business developments and rate of growth. Management has broad discretion over the use of proceeds of this offering and we may find it necessary or advisable to use all or portions of the proceeds from this offering for other purposes. Circumstances that may give rise to a change in the use of proceeds and the alternate purposes for which the proceeds may be used are discussed in the section entitled Use of Proceeds. You may not have an opportunity to evaluate the economic, financial or other information on which we base our decisions on how to use our proceeds. As a result, you and other shareholders may not agree with our decisions. Our failure to apply these funds effectively could have a material adverse effect on our business, financial condition, results of operations and prospects. Pending their use, we may invest the net proceeds from this offering in a manner that does not produce income or preserve value. See Use of Proceeds for additional information.
You will experience immediate dilution in the book value per share of the ordinary shares you purchase.
Because the price per share of our ordinary shares being offered is substantially higher than the net tangible book value per share of our ordinary shares, you will experience substantial dilution in the pro forma net tangible book value of the ordinary shares you purchase in this offering. Based on the assumed initial public offering price of $ per share, the midpoint of the range set forth on the cover page of this prospectus, if you purchase ordinary shares in this offering, you will experience immediate and substantial dilution of $ per share based on the pro forma net tangible book value of the ordinary shares as of December 31, 2019. See Dilution for a more detailed discussion of the dilution you will incur if you purchase ordinary shares in this offering. Moreover, we expect, in the future, to issue additional options to purchase our ordinary shares to compensate employees, consultants and directors and may issue additional shares to raise capital, to pay for services, or for other corporate purposes. To the extent our outstanding options or warrants are exercised or ordinary shares are issued at a price below net tangible book value per share, there will be additional dilution to our then-shareholders.
The purchase price of the ordinary shares may not reflect our actual value.
The purchase price of the ordinary shares is and will be determined through negotiations between us and representatives of the underwriters. The price of our ordinary shares may not be indicative of our actual value or any future market price for our securities. This price may not accurately reflect the value of the ordinary shares or the value that potential investors will realize upon their disposition of ordinary shares. The price does not necessarily bear any relationship to our assets, earnings, book value per share or other generally accepted criteria of value.
If equity research analysts do not publish research or reports about us or our business or if they issue unfavorable commentary or downgrade our ordinary shares, the price of our ordinary shares could decline.
The trading market for our ordinary shares will rely in part on the research and reports that equity research analysts publish about us and our business. The analysts estimates are based upon their own opinions and are often different from our estimates or expectations. If our results of operations are below the estimates or expectations of public market analysts and investors, the price of our ordinary shares could decline. Moreover, the price of our ordinary shares could decline if one or more securities analysts downgrade our ordinary shares or if those analysts issue other unfavorable commentary or cease publishing reports about us or our business.
We have identified material weaknesses in our internal control over financial reporting that could, if not remediated, result in material misstatements in our financial statements. If we fail to maintain an effective system of internal control over financial reporting, we may not be able to accurately report our financial results or prevent fraud. As a result, shareholders could lose confidence in our financial and other public reporting, which would harm our business and the trading price of our ordinary shares.
Effective internal controls over financial reporting are necessary for us to provide reliable financial reports and, together with adequate disclosure controls and procedures are designed to prevent fraud. Our management will be required to assess the effectiveness of our internal controls and procedures and disclose changes in these controls on an annual basis. However, for as long as we are an emerging growth company under the JOBS Act, our independent registered public accounting firm will not be required to attest to the effectiveness of our internal controls over financial reporting pursuant to Section 404.
Any failure to implement required new or improved controls, or difficulties encountered in their implementation could cause us to fail to meet our reporting obligations. In addition, any testing by us conducted in connection with Section 404, or any subsequent testing by our independent registered public accounting firm, may reveal deficiencies in our internal controls over financial reporting that are deemed to be material weaknesses or that may require prospective or retroactive changes to our financial statements or identify other areas for further attention or improvement. Inferior internal controls could also cause investors to lose confidence in our reported financial information, which could have a negative effect on the trading price of our ordinary shares.
We have identified a material weakness in our internal control over financial reporting in connection with the audit of our financial statements as of and for the years ended December 31, 2018 and 2019. As defined in Regulation 12b-2 under the Exchange Act, a material weakness is a deficiency, or combination of deficiencies,
in internal control over financial reporting, such that there is a reasonable possibility that a material misstatement of our annual financial statements will not be prevented, or detected on a timely basis. Specifically, we determined that the material weakness is related to having an insufficient number of financial reporting personnel with an appropriate level of knowledge, experience and training in application of U.S. GAAP and SEC rules and regulations commensurate with our reporting requirements.
We have taken action toward remediating this material weakness by hiring additional qualified personnel with US GAAP accounting and reporting experience, and intend to provide enhanced training to existing financial and accounting employees on related US GAAP issues. However, the implementation of these initiatives may not fully address any material weakness or other deficiencies that we may have in our internal control over financial reporting.
Furthermore, we have not yet commenced the process of determining whether our existing internal control over financial reporting systems are compliant with Section 404 and whether there are any other material weaknesses or significant deficiencies in our existing internal controls. These controls and other procedures are designed to ensure that information required to be disclosed by us in the reports that we file with the SEC is disclosed accurately and is recorded, processed, summarized and reported within the time periods specified in SEC rules and forms.
Even if we develop effective internal control over financial reporting, these controls may become inadequate because of changes in conditions or the degree of compliance with these policies or procedures may deteriorate, and material weaknesses and deficiencies may be discovered in them. We are working with our legal, independent accounting and financial advisors to identify those areas in which changes should be made to our financial and management control systems to manage our growth and our obligations as a public company. These areas include corporate governance, corporate control, disclosure controls and procedures and financial reporting.
We have made, and will continue to make, changes in these and other areas. In any event, the process of determining whether our existing internal controls are compliant with Section 404 and sufficiently effective will require the investment of substantial time and resources, including by our chief financial officer and other members of our senior management. As a result, this process may divert internal resources and take a significant amount of time and effort to complete, even more so after we are no longer an Emerging Growth Company. In addition, we cannot predict the outcome of this process and whether we will need to implement remedial actions in order to implement effective controls over financial reporting. The determination of whether or not our internal controls are sufficient and any remedial actions required could result in us incurring additional costs that we did not anticipate, including the hiring of outside consultants. We may also fail to complete our evaluation, testing and any required remediation needed to comply with Section 404 in a timely fashion. Irrespective of compliance with Section 404, any additional failure of our internal controls could have a material adverse effect on our stated results of operations and harm our reputation. As a result, we may experience higher than anticipated operating expenses, as well as higher independent auditor fees during and after the implementation of these changes. If we are unable to implement any of the required changes to our internal control over financial reporting effectively or efficiently or are required to do so earlier than anticipated, it could adversely affect our operations, financial reporting or results of operations and could result in an adverse opinion on internal controls from our independent auditors.
Furthermore, if we are unable to certify that our internal control over financial reporting is effective and in compliance with Section 404, we may be subject to sanctions or investigations by regulatory authorities, such as the SEC or stock exchanges, and we could lose investor confidence in the accuracy and completeness of our financial reports, which could hurt our business, the price of our ordinary shares and our ability to access the capital markets.
It is likely that we will be classified as a passive foreign investment company, or PFIC, for U.S. federal income tax purposes for the current taxable year and possibly for future taxable years, which could result in adverse U.S. federal income tax consequences to U.S. Holders of our ordinary shares.
A non-U.S. corporation will be a PFIC for any taxable year if either (1) at least 75% of its gross income for such year consists of certain types of passive income; or (2) at least 50% of the value of its assets (generally determined based on an average of the quarterly values of the assets) during such year is attributable to assets
that produce passive income or are held for the production of passive income. For this purpose, cash and assets readily convertible into cash are categorized as passive assets and our goodwill and other unbooked intangibles will generally be taken into account in determining our asset value.
A non-U.S. corporations PFIC status is a factual determination made annually after the close of each taxable year. Based upon our current and projected income and assets (including goodwill and taking into account our cash balances, including the anticipated proceeds from this offering) and the anticipated market price of our ordinary shares in this offering, it is likely that we will be classified as a PFIC for the current and future taxable years at least until we start generating a substantial amount of active revenue. In addition, it is possible that any subsidiary that we own would also be classified as a PFIC for such taxable years. Accordingly, prospective investors should be willing to assume the risks of investing in a PFIC.
If we were to be, or become, classified as a PFIC for any taxable year during which a U.S. Holder (as defined in the section headed Material Tax Considerations—U.S. Federal Income Tax Consequences) holds our ordinary shares, certain adverse U.S. federal income tax consequences could apply to such U.S. Holder. See Material Tax Considerations—U.S. Federal Income Tax Consequences.
You are strongly urged to consult your tax advisors regarding the impact of our being a PFIC in any taxable year on your investment in our ordinary shares as well as the application of the PFIC rules.
Risks Related to Our Operations in Israel
Conditions in Israel could materially and adversely affect our business.
Our executive offices are located in Neve Ilan, Israel. In addition, a number of our officers, directors and director nominees are residents of Israel. Accordingly, political, economic and military conditions in Israel and the surrounding region may directly affect our business and operations. Since the establishment of the State of Israel in 1948, a number of armed conflicts have taken place between Israel and its neighboring countries, as well as terrorist acts committed within Israel by hostile elements. During the last decade, there have been extended hostilities in 2009, 2012 through 2014, with additional small flare-ups as recently as 2018 and 2019.
Since February 2011, Egypt has experienced political turbulence and an increase in terrorist activity in the Sinai Peninsula. Such political turbulence and violence may damage peaceful and diplomatic relations between Israel and Egypt, and could affect the region as a whole. Similar civil unrest and political turbulence has occurred in other countries in the region, including Syria, which shares a common border with Israel, and is affecting the political stability of those countries. Since April 2011, internal conflict in Syria has escalated and chemical weapons have been used in the region. Foreign actors have intervened and may continue to intervene in Syria. This instability and any intervention may lead to deterioration of the political and economic relationships that exist between the State of Israel and some of these countries and may lead to additional conflicts in the region. In addition, Iran has threatened to attack Israel and may be developing nuclear weapons. Iran also has a strong influence among extremist groups in the region, including Hamas in Gaza, Hezbollah in Lebanon and various rebel militia groups in Syria. These situations have escalated at various points in recent years and may escalate in the future to more violent events, which may affect Israel and us. Any armed conflicts, terrorist activities or political instability in the region could adversely affect business conditions and could harm our results of operations and could make it more difficult for us to raise capital. In addition, the political and security situation in Israel may result in parties with whom we have agreements involving performance in Israel claiming that they are not obligated to perform their commitments under those agreements pursuant to force majeure provisions in such agreements.
We currently do not, and we do not expect to, carry any commercial insurance that covers losses resulting from events associated with war and terrorism. Although the Israeli government currently covers the reinstatement value of direct damages that are caused by terrorist attacks or acts of war, we cannot be assured that this government coverage will be maintained or, if maintained, that it will be sufficient to compensate us fully for damages incurred and the government may cease providing such coverage or the coverage might not suffice to cover potential damages. Any losses or damages incurred by us could have a material adverse effect on our business. Any armed conflicts or political instability in the region would likely negatively affect business conditions and could harm our results of operations.
Further, in the past, the State of Israel and Israeli companies have been subjected to economic boycotts. Several countries still restrict business with the State of Israel and with Israeli companies. These restrictive laws and policies may have an adverse impact on our operating results, financial condition or the expansion of our business. A campaign of boycotts, divestment and sanctions has been undertaken against Israel, which could also adversely impact our business.
In addition, many Israeli citizens are obligated to perform several days, and in some cases more, of annual military reserve duty each year until they reach the age of 40 (or older for certain reservists) and, in the event of a military conflict, may be called to active duty. In response to increases in terrorist activity, there have been periods of significant call-ups of military reservists. It is possible that there will be military reserve duty call-ups in the future. Our operations could be disrupted by such call-ups, which may include the call-up of members of our management. Such disruption could materially adversely affect our business, prospects, financial condition and results of operations.
The termination or reduction of tax and other incentives that the Israeli government provides to Israeli companies may increase our costs and taxes.
The Israeli government currently provides tax and capital investment incentives to Israeli companies, as well as grant and loan programs relating to research and development and marketing and export activities (see Material Tax Considerations—Israeli Tax Considerations and Government Programs). In recent years, the Israeli government has reduced the benefits available under these programs and the Israeli governmental authorities may in the future further reduce or eliminate the benefits of these programs. We may take advantage of these benefits and programs in the future; however, there can be no assurance that such benefits and programs will be available to us. If we qualify for such benefits and programs and fail to meet the conditions thereof, the benefits could be canceled and we could be required to refund any benefits we might already have enjoyed and become subject to penalties. Additionally, if we qualify for such benefits and programs and they are subsequently terminated or reduced, it could have an adverse effect on our financial condition and results of operations.
It may be difficult to enforce a U.S. judgment against us, our officers, directors and director nominees named in this prospectus in Israel or the United States, or to assert U.S. securities laws claims in Israel or serve process on our officers, directors and director nominees.
Many of our directors, director nominees or officers are not residents of the United States and a significant portion of their and our assets are located outside the United States. Service of process upon us or our non-U.S. resident directors, director nominees and officers may be difficult to obtain within the United States. We have been informed by our legal counsel in Israel that it may be difficult to assert claims under U.S. securities laws in original actions instituted in Israel or obtain a judgment based on the civil liability provisions of U.S. federal securities laws. Israeli courts may refuse to hear a claim based on a violation of U.S. securities laws against us or our officers, directors and director nominees because Israel may not be the most appropriate forum to bring such a claim. In addition, even if an Israeli court agrees to hear a claim, it may determine that Israeli law and not U.S. law is applicable to the claim. If U.S. law is found to be applicable, the content of applicable U.S. law must be proved as a fact, which can be a time-consuming and costly process. Certain matters of procedure will also be governed by Israeli law. There is little binding case law in Israel addressing the matters described above. Additionally, Israeli courts might not enforce judgments obtained in the United States against us or our directors, director nominees and executive officers, which may make it difficult to collect on judgments rendered against us or our officers, directors and director nominees.
Moreover, an Israeli court will not enforce a non-Israeli judgment if it was given in a state whose laws do not provide for the enforcement of judgments of Israeli courts (subject to exceptional cases), if its enforcement is likely to prejudice the sovereignty or security of the State of Israel, if it was obtained by fraud or in the absence of due process, if it is at variance with another valid judgment that was given in the same matter between the same parties, or if a suit in the same matter between the same parties was pending before a court or tribunal in Israel at the time the foreign action was brought. For more information, see Enforceability of civil liabilities.
Your rights and responsibilities as our shareholder will be governed by Israeli law, which may differ in some respects from the rights and responsibilities of shareholders of U.S. corporations.
We are incorporated under Israeli law. The rights and responsibilities of holders of our ordinary shares are governed by our amended and restated articles of association to be effective upon the closing of this offering and the Israeli Companies Law, 5759-1999 (the Companies Law). These rights and responsibilities differ in some
respects from the rights and responsibilities of shareholders in typical U.S. corporations. In particular, pursuant to the Companies Law, each shareholder of an Israeli company has to act in good faith and in a customary manner in exercising his or her rights and fulfilling his or her obligations toward the company and other shareholders and to refrain from abusing his or her power in the company, including, among other things, in voting at the general meeting of shareholders on amendments to a companys articles of association, increases in a companys authorized share capital, mergers and certain transactions requiring shareholders approval under the Companies Law. In addition, under Israeli law, a controlling shareholder of an Israeli company or a shareholder who knows that it possesses the power to determine the outcome of a shareholder vote or who has the power to appoint or prevent the appointment of a director or officer in the company or has other powers toward the company has a duty of fairness toward the company. However, Israeli law does not define the substance of this duty of fairness. There is little case law available in Israel to assist in understanding the implications of these provisions that govern shareholder behavior.
Provisions of our amended and restated articles of association and Israeli law and tax considerations may delay, prevent or make difficult an acquisition of us, which could prevent a change of control and negatively affect the price of our ordinary shares.
Israeli corporate law regulates mergers, requires tender offers for acquisitions of shares if such acquisitions cause the acquirer to hold more than specified thresholds, requires special approvals for certain transactions involving directors, officers or significant shareholders and regulates other matters that may be relevant to these types of transactions. For example, under Israeli law, a merger may not be consummated unless at least 50 days have passed from the date that a merger proposal was filed by each merging company with the Israel Registrar of Companies and at least 30 days have passed from the date that the shareholders of both merging companies approved the merger. See Description of Share Capital—Acquisitions under Israeli Law.
Furthermore, Israeli tax considerations may make potential transactions unappealing to us or to our shareholders, especially for those shareholders whose country of residence for tax purposes does not have a tax treaty with Israel which exempts such shareholders from Israeli tax. For example, Israeli tax law does not recognize tax-free share exchanges to the same extent as U.S. tax law. With respect to mergers, Israeli tax law allows for tax deferral in certain circumstances but makes the deferral contingent on the fulfillment of a number of conditions, including, in some cases, a holding period of two years from the date of the transaction during which sales and dispositions of shares of the participating companies are subject to certain restrictions. Moreover, with respect to certain share swap transactions, the tax deferral is limited in time, and when such time expires, the tax becomes payable even if no disposition of the shares has occurred. In order to benefit from the tax deferral, a pre-ruling from the Israeli Tax Authority may be required.
These provisions of Israeli law and Israeli tax laws may delay, prevent or make difficult a merger with, or an acquisition of us, or all or a significant portion of our assets, which could prevent a change of control and may make it more difficult for a third party to acquire us, even if doing so would be beneficial to our shareholders. These provisions may limit the price that investors may be willing to pay in the future for our ordinary shares and therefore depress the price of our shares.
Our amended and restated articles of association provide that our directors (other than external directors) are elected on a staggered basis, such that a potential acquirer cannot readily replace our entire board of directors at a single annual general shareholders meeting.
This prospectus contains forward-looking statements that are subject to risks and uncertainties. All statements that are not historical facts contained in this prospectus are forward-looking statements. These forward-looking statements include information about possible or assumed future results of our business, financial condition, results of operations, prospects, liquidity, plans and objectives. In some cases, you can identify forward-looking statements by terminology such as can, might, believe, may, estimate, continue, anticipate, intend, should, plan, should, could, expect, predict, potential, or the negative of these terms or other similar expressions. Forward-looking statements are based on information we have when those statements are made or our managements good faith belief as of that time with respect to future events, and are subject to risks and uncertainties that could cause actual performance or results to differ materially from those expressed in or suggested by the forward-looking statements. Forward-looking statements include, but are not limited to, statements concerning:
|•||The initiation, timing, progress and results of our research and development, manufacturing and commercialization activities with respect to our X-ray source technology, the Nanox.ARC, the Nanox.CLOUD and the Nanox System;|
|•||our ability to successfully demonstrate the feasibility of our technology for commercial applications;|
|•||our expectations regarding the necessity of, timing of filing for, and receipt of, regulatory clearances or approvals regarding our technology, the Nanox.ARC and the Nanox.CLOUD;|
|•||our ability to secure and maintain required FDA clearance and similar approvals from regulatory agencies worldwide and comply with applicable quality standards and regulatory requirements;|
|•||our ability to manufacture the Nanox.ARC, if cleared, at substantially lower costs compared to medical imaging systems that use a legacy analog X-ray source;|
|•||our ability to manufacture, market and deploy approximately 15,000 Nanox.ARC units within the contemplated timeframe;|
|•||our ability to meet our planned deployment schedule for the Nanox System units within the contemplated timeframe;|
|•||the pricing structure of our products and services, if such products and services receive regulatory clearance or approval;|
|•||the implementation of our business models;|
|•||our expectations regarding collaborations with third-parties and their potential benefits;|
|•||our ability to enter into and maintain our arrangements with third-party manufacturers and suppliers;|
|•||our ability to conduct business globally;|
|•||our expectations regarding when certain patents may be issued and the protection and enforcement of our intellectual property rights;|
|•||our ability to operate our business without infringing the intellectual property rights and propriety technology of third parties;|
|•||regulatory developments in the United States and other jurisdictions;|
|•||estimates of our expenses, future revenues, capital requirements and our needs for additional financing;|
|•||the rate and degree of market acceptance of our technology and our products;|
|•||development relating to our competitors and the medical imaging industry;|
|•||our estimates of the adoption of the MSaaS-based model by market participants;|
|•||our estimates regarding the market opportunities for our technology and our products;|
|•||our ability to attract, motivate and retain key executive managers;|
|•||our ability to comply with data protection laws, regulations and similar rules and to establish and maintain adequate cyber-security and data protection;|
|•||our ability to obtain third-party payor coverage or reimbursement of our Nanox System;|
|•||our ability to continue as a going concern;|
|•||our expectation regarding the maintenance of our foreign private issuer and emerging growth company status;|
|•||our expectations regarding the use of proceeds from this offering; and|
|•||our success at managing other risks and uncertainties, including those listed under Risk Factors.|
Many important factors, in addition to the factors described above and in other sections of this prospectus, could adversely impact our business and financial performance. The forward-looking statements contained in this prospectus speak only as of the date of this prospectus and are subject to a number of known and unknown risks, uncertainties and assumptions, including those described under the sections in this prospectus entitled Risk Factors and Managements Discussion and Analysis of Financial Condition and Results of Operations and elsewhere in this prospectus. Because forward-looking statements are inherently subject to risks and uncertainties, some of which cannot be predicted or quantified and some of which are beyond our control, you should not rely on these forward-looking statements as predictions of future events. Moreover, we operate in an evolving environment. New risks and uncertainties emerge from time to time, and it is not possible for our management to predict all risks and uncertainties, nor can we assess the impact of all factors on our business or the extent to which any factor, or combination of factors, may cause actual results to differ materially from estimates or forward-looking statements. We qualify all of our forward-looking statements by these cautionary statements. Except as required by law, we undertake no obligation to update publicly any forward-looking statements after the date of this prospectus to conform these statements to actual results or to changes in our expectations.
We expect that we will receive net proceeds from this offering of approximately $ million, based on an assumed initial public offering price of $ per share, the mid-point of the estimated range of the initial public offering price shown on the cover page of this prospectus, after deducting the estimated underwriting discounts and commissions and estimated offering expenses payable by us. If the underwriters exercise their option to purchase additional ordinary shares in full, our net proceeds will be approximately $ million after deducting the estimated underwriting discounts and commissions and estimated offering expenses payable by us.
We intend to use the net proceeds from our sale of ordinary shares in this offering, together with cash on hand, cash equivalents and short-term investments, as follows:
|•||between $ million to $ million will be used for the manufacturing of the initial wave of Nanox.ARC units planned for global deployment and investment in manufacturing capacities; to the extent the cost-per-unit of the Nanox.ARC is higher than we expected or the amount of proceeds we receive is lower than we expected, we plan to reduce the number of units to be manufactured with such proceeds accordingly;|
|•||between $ million to $ million will be used for the shipping, installation, deployment and maintenance costs of the Nanox System; to the extent the number of units of the Nanox.ARC to be manufactured is reduced for the reasons described above, the amount of proceeds to be used for shipping, installation and deployment will be reduced accordingly;|
|•||between $ million to $ million will be used for the continued research and development of the Nanox.ARC, the development of the Nanox.CLOUD and for regulatory clearance, which we expect will be sufficient for obtaining the 510(k) medical device clearance with respect to the Nanox.ARC with the FDA;|
|•||between $ million to $ million will be used for sales and marketing expenses in connection with the deployment of the Nanox System; and|
|•||the remaining funds, if any, to be used for general and administrative expenses and general corporate purposes.|
Pending such use of the net proceeds from this offering, we intend to hold some amounts as cash and to invest the remaining net proceeds in a variety of capital preservation investments, including short-term, investment-grade, interest-bearing instruments denominated in currencies and with maturities that match our contracted expenditures and financial plans.
The amounts and timing of our actual expenditures will depend on numerous factors, including market conditions, results from our research and development efforts, business developments and opportunities and customer facing and product support activities. Accordingly, our management will have broad discretion in the application of the net proceeds, and investors will be relying on the judgment of our management regarding the application of the proceeds from this offering. We may find it necessary or advisable to use portions of the proceeds from this offering for other purposes. Circumstances that may give rise to a change in the use of proceeds and the alternate purposes for which the proceeds may be used include:
|•||the existence of unforeseen or other opportunities or the need to take advantage of changes in timing of our existing activities;|
|•||the need or desire on our part to accelerate, increase, reduce or eliminate one or more existing initiatives due to, among other things, changing market conditions or competitive developments or interim results of research and development efforts;|
|•||results from our business development and marketing efforts;|
|•||the effect of federal, state, and local regulation on our business; and|
|•||the presentation of strategic opportunities of which we are not currently aware (including acquisitions, joint ventures, licensing and other similar transactions).|
From time to time, we evaluate these and other factors and we anticipate continuing to make such evaluations to determine if the existing allocation of resources, including the proceeds of this offering, is being optimized.
A $1.00 increase or decrease in the assumed initial public offering price of $ per share, which is the midpoint of the price range set forth on the cover page of this prospectus, would increase or decrease, as applicable, the net proceeds to us from this offering by approximately $ million, assuming the number of shares offered by us remains the same as set forth on the cover page of this prospectus and after deducting the estimated underwriting discounts and commissions and estimated offering expenses payable by us.
We have never declared or paid any cash dividends on our ordinary shares and we anticipate that, for the foreseeable future, we will retain any future earnings to support operations and to finance the growth and development of our business. Therefore, we do not expect to pay cash dividends for at least the next several years.
The distribution of dividends may also be limited by the Companies Law, which permits the distribution of dividends only out of retained earnings or earnings derived over the two most recent fiscal years, whichever is higher, provided that there is no reasonable concern that payment of a dividend will prevent a company from satisfying its existing and foreseeable obligations as they become due. Our amended and restated articles of association provide that dividends will be paid at the discretion of, and upon resolution by, our board of directors, subject to the provision of the Companies Law. See Description of Share Capital—Dividend and Liquidation Rights.
The following table sets forth our cash and cash equivalents and total capitalization as of December 31, 2019. Our capitalization is presented on:
|•||an actual basis;|
|•||a pro forma basis to give effect to (i) the receipt of $ and the issuance of ordinary shares to certain investors after December 31, 2019 in connection with the Private Placement, (ii) the issuance of 1,109,245 ordinary shares to Nanox Gibraltar in full satisfaction of our obligations under the Asset Purchase Agreement (as further described under Management’s Discussion and Analysis of Financial Condition and Results of Operations—Asset Purchase), and (iii) the receipt of $ pursuant to the exercise of warrants held by certain of our shareholders and the related issuance of ordinary shares as a result thereof immediately prior to the closing of this offering (collectively, the Transactions); and|
|•||on a pro forma as adjusted basis to give further effect to the issuance and sale of ordinary shares by us in this offering at an assumed initial public offering price of $ per share, the midpoint of the price range set forth on the cover page of this prospectus, after deducting the estimated underwriting discounts and commissions and estimated offering expenses payable by us.|
You should read this table in conjunction with our audited consolidated financial statements and related notes as appearing elsewhere in this prospectus and the sections of this prospectus titled Selected Consolidated Financial Data, and Managements Discussion and Analysis of Financial Condition and Results of Operations included elsewhere in this prospectus.
($ in thousands, except share and
per share amounts)
Cash and cash equivalents
Shareholders’ equity (deficit):
Ordinary Shares, par value NIS 0.01 per share; 40,000,000 shares authorized, actual; shares authorized, pro forma and pro forma as adjusted; 27,150,080 shares issued and outstanding, actual; shares issued and outstanding, pro forma; shares issued and outstanding, pro forma as adjusted
Additional paid-in capital
Total shareholders’ equity
|(1)||Each $1.00 increase or decrease in the assumed initial public offering price of $ per share (which is the midpoint of the price range set forth on the cover page of this prospectus) would increase or decrease the amount of each of cash and cash equivalents, additional paid-in capital, total shareholders’ equity and total capitalization on a pro forma as adjusted basis by approximately $ million, assuming that the number of shares offered by us, as set forth on the cover page of this prospectus, remains the same and after deducting the estimated underwriting discounts and commissions and estimated offering expenses payable by us. Each increase or decrease of 1.0 million in the number of ordinary shares we are offering would increase or decrease the pro forma as adjusted amount of each of cash and cash equivalents, additional paid-in capital, total shareholders’ equity and total capitalization by approximately $ million, assuming no change in the assumed initial public offering price and after deducting the estimated underwriting discounts and commissions and estimated offering expenses payable by us.|
As of December 31, 2019, after giving effect to the issuance of shares in accordance with the terms of the Asset Purchase Agreement in January 2020 (as further described under Managements Discussion and Analysis of Financial Condition and Results of Operations—Asset Purchase), we did not have any indebtedness.
The table above excludes:
|•||3,654,464 ordinary shares issuable upon the exercise of options to purchase ordinary shares outstanding under the 2019 Equity Incentive Plan as of December 31, 2019, at a weighted average exercise price of $2.21per share;|
|•||4,387,472 additional ordinary shares reserved for future issuance under our 2019 Equity Incentive Plan as of December 31, 2019;|
|•||2,646,038 ordinary shares issuable upon the exercise of warrants to purchase ordinary shares as of December 31, 2019, at a weighted average exercise price of $2.39 per share, which warrants shall not expire upon the closing of this offering if not exercised; and|
|•||ordinary shares issuable upon the exercise of options to purchase ordinary shares to be granted to A-Labs Finance and Advisory Ltd, which provided certain consulting services for this offering, at the closing of this offering, at an exercise price of $ per share.|
If you invest in our ordinary shares in this offering, your ownership interest will be immediately diluted to the extent of the difference between the initial public offering price per share and the pro forma as adjusted net tangible book value per share after this offering. Our historical net tangible book value as of December 31, 2019 was $0.32 per share.
Historical net tangible book value per share was calculated by:
|•||subtracting our liabilities from our tangible assets as of December 31, 2019; and|
|•||dividing the difference by the number of ordinary shares outstanding as of December 31, 2019.|
Our pro forma net tangible book value as of December 31, 2019 was $ per share. Pro forma net tangible book value per share gives further effect to the Transactions (as defined and further described under Capitalization).
After giving effect to the sale of ordinary shares that we are offering at an assumed initial public offering price of $ per share (which is the midpoint of the price range set forth on the cover page of this prospectus), after deducting the estimated underwriting discounts and commissions and estimated offering expenses payable by us, our pro forma as adjusted net tangible book value as of December 31, 2019 would have been $ per share. This amount represents an immediate increase in pro forma net tangible book value of $ per share to our existing shareholders and an immediate dilution in pro forma net tangible book value of $ per share to new investors purchasing ordinary shares in this offering. We determine dilution by subtracting the pro forma as adjusted net tangible book value per share after this offering from the initial public offering price per share paid by new investors in this offering.
The following table illustrates this dilution on a per share basis:
Assumed initial public offering price per share
Historical net tangible book value per share as of December 31, 2019
Increase per share attributable to the Transactions
Pro forma net tangible book value (deficit) per share as of December 31, 2019
Increase per share attributable to this offering
Pro forma as adjusted net tangible book value per share after this offering
Dilution per share to new investors in this offering
A $1.00 increase or decrease in the assumed initial public offering price of $ per share (which is the midpoint of the price range set forth on the cover page of this prospectus) would increase or decrease the dilution to new investors by approximately $ per share, assuming that the number of shares offered by us, as set forth on the cover page of this prospectus, remains the same and after deducting the estimated underwriting discounts and commissions and estimated offering expenses payable by us. Each increase or decrease of 1.0 million shares in the number of shares offered by us would increase or decrease our pro forma as adjusted net tangible book value per share after this offering by $ per share and decrease or increase the dilution to new investors by $ per share, assuming that the assumed initial public offering price remains the same, and after deducting the estimated underwriting discounts and commissions and the estimated offering expenses payable by us.
If the underwriters exercise their option to purchase additional ordinary shares in full in this offering, the pro forma as adjusted net tangible book value after the offering would be $ per share, the increase in net tangible book value per share to existing shareholders would be $ per share and the dilution in net tangible book value per share to new investors would be $ per share, in each case assuming an initial public offering price of $ per share (which is the midpoint of the price range set forth on the cover page of this prospectus).
The following table summarizes, on a pro forma as adjusted basis, as of December 31, 2019, the differences between the number of shares purchased from us, the total consideration paid to us, and the average price per share that existing shareholders paid during the past five years, on the one hand, and the average price per share that new investors are paying in this offering at the assumed initial public offering price of $ per share (which is the midpoint of the price range set forth on the cover page of this prospectus), before deducting the estimated underwriting discounts and commissions and estimated offering expenses payable by us, on the other hand.
A $1.00 increase or decrease in the assumed initial public offering price of $ per share (which is the midpoint of the price range set forth on the cover page of this prospectus) would increase or decrease the total consideration paid by new investors by $ million and, in the case of an increase, would increase the percentage of total consideration paid by new investors by percentage points and, in the case of a decrease, would decrease the percentage of total consideration paid by new investors by percentage points, assuming that the number of shares offered by us, as set forth on the cover page of this prospectus, remains the same. An increase or decrease of 1.0 million shares in the number of shares offered by us, as set forth on the cover page of this prospectus, would increase or decrease the total consideration paid by new investors by $ and, in the case of an increase, would increase the percentage of total consideration paid by new investors by percentage points and, in the case of a decrease, would decrease the percentage of total consideration paid by new investors by percentage points, assuming no change in the assumed initial public offering price.
If the underwriters exercise their option to purchase additional ordinary shares in full:
|•||the percentage of ordinary shares held by existing shareholders will decrease to approximately % of the total number of our ordinary shares outstanding after this offering; and|
|•||the number of shares held by new investors will increase to , or approximately % of the total number of our ordinary shares outstanding after this offering.|
The pro forma and pro forma as adjusted information discussed above is illustrative only. Our actual net tangible book value following the completion of this offering is subject to adjustment based on the actual initial public offering price of our ordinary shares and other terms of this offering determined at pricing.
We may choose to raise additional capital due to market conditions or strategic considerations even if we believe we have sufficient funds for our current or future operating plans. To the extent that additional capital is raised through the sale of equity or convertible debt securities, the issuance of these securities may result in further dilution to new investors participating in this offering.
The number of our ordinary shares outstanding after this offering is based on 27,150,080 ordinary shares outstanding as of December 31, 2019 and excludes:
|•||3,654,464 ordinary shares issuable upon the exercise of options to purchase ordinary shares outstanding under the 2019 Equity Incentive Plan as of December 31, 2019, at a weighted average exercise price of $2.21 per share;|
|•||4,387,472 additional ordinary shares reserved for future issuance under our 2019 Equity Incentive Plan as of December 31, 2019;|
|•||2,646,038 ordinary shares issuable upon the exercise of warrants to purchase ordinary shares as of December 31, 2019, at a weighted average exercise price of $2.39 per share, which warrants shall not expire upon the closing of this offering if not exercised; and|
|•||ordinary shares issuable upon the exercise of options to purchase ordinary shares to be granted to A-Labs Finance and Advisory Ltd, which provided certain consulting services for this offering, at the closing of this offering, at an exercise price of $ per share.|
To the extent any of these outstanding options or warrants are exercised, there will be further dilution to new investors. To the extent all of such outstanding options and warrants had been exercised as of December 31, 2019, the pro forma as adjusted net tangible book value per share after this offering would be $ , and total dilution per share to new investors would be $ .
The following tables set forth our selected consolidated historical financial data which is derived from our audited financial statements, which have been prepared in accordance with U.S. GAAP. The selected statement of operations and balance sheet data for the years ended or as of December 31, 2019 and 2018 have been derived from our audited consolidated financial statements included elsewhere in this prospectus. For periods and at dates prior to the Asset Purchase, our financial statements were prepared based on the historical financial statements of Nanox Gibraltar, with certain adjustments as described under Basis of Presentation. You should read this selected consolidated financial data section in conjunction with, and it is qualified in its entirety by, reference to our historical financial information and other information provided in this prospectus including Managements Discussion and Analysis of Financial Condition and Results of Operations and our audited consolidated financial statements and related notes included elsewhere in this prospectus. The historical results set forth below are not necessarily indicative of the results to be expected in future periods.
($ in thousands, except share and
per share data)
Consolidated Statement of Operations Data:
Research and development expenses
General and administrative expenses
Financial (income) expenses, net
Net loss for the year
Basic and diluted loss per ordinary share(1)
Weighted average number of ordinary shares outstanding – basic and diluted(1)
|(1)||Basic loss per share and diluted loss per share are the same because outstanding options would be anti-dilutive due to our net losses in these periods. See Note 11 to our financial statements appearing at the end of this prospectus for further details on the calculation of basic and diluted net loss per share attributable to our ordinary shareholders.|
($ in thousands)
Consolidated Balance Sheet Data:
Cash and cash equivalents
Total shareholders’ deficit
|(1)||We define working capital as current assets less current liabilities.|
You should read the following discussion and analysis of our financial condition and results of operations together with the Selected Consolidated Financial Data section of this prospectus and our consolidated financial statements and the related notes included elsewhere in this prospectus. Some of the information contained in this discussion and analysis or set forth elsewhere in this prospectus, including information with respect to our plans and strategy for our business and related financing, includes forward-looking statements that involve risks and uncertainties. As a result of many factors, including those factors set forth in the Risk Factors section of this prospectus, our actual results could differ materially from the results described in or implied by the forward-looking statements contained in the following discussion and analysis.
Early detection saves lives—and we at Nanox are focused on applying our proprietary medical imaging technology to make diagnostic medicine more accessible and affordable across the globe. Our vision is to increase early detection of medical conditions that are discoverable by X-ray, which we believe is key to increasing early treatment, improving health outcomes and, ultimately, saving lives.
To further our vision, we designed the Nanox.ARC, a medical imaging system incorporating our novel X-ray source, and we are developing the Nanox.CLOUD, a companion cloud software. If cleared, we plan to market and deploy the Nanox System broadly across the globe at a substantially lower cost compared to currently available medical imaging systems, such as CT. We believe that, if cleared, our technologys relatively low cost will enable us to increase accessibility and affordability of early-detection medical imaging systems globally.
Since our inception, we have devoted substantially all of our financial resources to acquiring the base technology for our X-ray source and related know-how, conducting research and development activities, organizing and staffing our company, developing our business plan, securing related intellectual property rights and raising capital. We do not have any product approved for sale and have not generated any revenue from product sales. We have funded our operations to date primarily with proceeds from the sale of our ordinary shares and those of our predecessor company. During the years ended December 31, 2018 and 2019, we received net cash proceeds of $3.7 million and $14.0 million from the sales of our and our predecessors ordinary shares.
We have incurred significant operating losses since our inception. Our ability to achieve profitability depends on the successful development and commercialization of our technology and our products. We incurred net losses of $1.9 million and $22.6 million for the years ended December 31, 2018 and 2019, respectively. As of December 31, 2019, we had an accumulated deficit of $40.6 million. We expect to continue to incur significant expenses for at least the next several years as we advance the Nanox System through further development and regulatory approval. If we obtain marketing approval for the Nanox.ARC, we expect to incur significant commercialization expenses related to product manufacturing, marketing, sales and distribution. In addition, upon the closing of this offering, we expect to incur additional costs associated with operating as a public company, including significant legal, accounting, investor relations and other expenses that we did not incur as a private company.
We plan to jumpstart the MSaaS-based medical imaging market by producing and deploying an initial wave of approximately 15,000 Nanox.ARC units. We estimate that effectively stimulating market interest in our Nanox System will require deploying at least 5,000 to 10,000 Nanox.ARC units. In addition, we believe that a minimum installed base of at least 1,000 Nanox.ARC units will be required to support our business during the initial wave of deployment, assuming we enter into at least one licensing agreement on commercially reasonable terms. We expect to incur significant expenses for the manufacture, installation, deployment and maintenance of the Nanox System. As a result, we need substantial funding to support our continuing operations and pursue our business strategy before we can generate significant revenues. Until such time as we can generate significant revenue from product sales, if ever, we expect to finance our operations through the sale of equity, debt financings or other capital sources, including collaborations, strategic partnerships or marketing, distribution or licensing arrangements with third parties. We may be unable to raise additional funds or enter into such other agreements
or arrangements when needed on favorable terms, or at all. If we fail to raise capital or enter into such agreements as and when needed, we may have to significantly delay, scale back or discontinue the development and commercialization of one or more of our products or delay our pursuit of potential in-licenses or acquisitions.
As of December 31, 2019, we had cash and cash equivalents of $8.1 million. We believe that the anticipated net proceeds from this offering, together with our cash on hand, cash equivalents and short-term investments, will enable us to fund our operating expenses and capital expenditure requirements for at least the next months. We have based this estimate on assumptions that may prove to be wrong, and we could exhaust our capital resources sooner than we expect. See —Liquidity and Capital Resources.
The Company (NANO-X IMAGING LTD), an Israeli limited liability company, was formed on December 20, 2018. Pursuant to the Asset Purchase Agreement, as amended on December 3, 2019 and December 31, 2019, substantially all of the assets of Nanox Gibraltar, including all patents, patent applications and all other intellectual property rights, but not including the shares of Nanox Japan, Inc., a wholly owned subsidiary of Nanox Gibraltar (Nanox Japan (predecessor)), were sold to the Company for an aggregate consideration of $13.3 million, reflecting the fair market value of the transferred assets, which was estimated to be $6.1 million (excluding cash) based on an independent valuation report, plus the cash balance less $200,000, which cash amount totaled $7.2 million as of the date of the Asset Purchase Agreement.
Under the terms of the Asset Purchase Agreement, the consideration for the transferred assets will be paid only on the occurrence of one of the following events: (a) the closing of a transaction involving the sale of all or substantially all of the Companys assets; (b) the acquisition of the Company by, or the merger of the Company with, another entity, consolidation, reorganization, recapitalization, sale, assignment or disposal by the Company of all or substantially all of the issued and outstanding shares of the Company; (c) the transfer, sale, lease, grant or other disposition of or the grant of an exclusive license over all or substantially all of Companys assets, including, but not limited to, intellectual property, with the same economic effect to that of a sale and/or cessation of its business; (d) any other transaction, except for a financing round, following which the shareholders of the Company prior to the closing of such transaction own, directly or indirectly, less than 50% of the voting power of the surviving entity; (e) the closing of the first underwritten public offering of the Company pursuant to a registration statement under the Securities Act or the Israeli Securities Law, 5728-1968, as amended (or under equivalent securities law of another jurisdiction) or any other securities laws world-wide with the same effects and results; and (f) an equity financing of the Company at a minimum pre-money valuation of $100.0 million, with proceeds to the Company of at least $30.0 million. In the events of (e) or (f) above, the Company will have the option to pay the consideration in cash or by the issuance to Nanox Gibraltar of the Companys securities of the same series to be issued upon such event, in an amount reflecting a 25% discount on the price per share to be determined in connection with (e) and (f) above. If the Company elects to pay such consideration in cash, Nanox Gibraltar will have the right, at its sole discretion and in good faith, to reject such payment in cash, and require that the Company pay such consideration in the form of the Companys securities in such amount and with such discount described above. In connection with this, the Company recorded a related party liability in an amount of $17.8 million in its financial statements as of and for the year ended December 31, 2019.
In January 2020, the board of directors of the Company and the board of directors and shareholders of Nanox Gibraltar approved the issuance of shares in accordance with the terms of the Asset Purchase Agreement described above. As a result, 1,109,245 of the Companys ordinary shares were issued to Nanox Gibraltar, representing an aggregate consideration of approximately $17.8 that reflects a 25% discount on the price per share received in the Private Placement, and the Company has no further obligations to Nanox Gibraltar under the Asset Purchase Agreement.
Components of Our Results of Operations
As of the date of this prospectus, we have not generated any revenue from product sales or otherwise.
Research and Development Expenses
Research and development expenses consist primarily of costs incurred in connection with the research and development of our products. These expenses include:
|•||expenses incurred in connection with the development of our products, including payments made pursuant to agreements with third parties, such as outside consultants related to process development and manufacturing activities, as well as patent registrations;|
|•||costs of components and materials, including payments made pursuant to agreements with third parties;|
|•||costs of laboratory supplies incurred for each program;|
|•||facilities, depreciation and other expenses, including direct or allocated expenses for rent and maintenance of facilities, as well as insurance costs;|
|•||costs related to compliance with regulatory requirements; and|
|•||employee-related expenses, including salaries, related benefits and share-based compensation expenses for employees engaged in research and development activities.|
We recognize external development costs based on an evaluation of the progress to completion of specific tasks using information provided to us by our suppliers and service providers. Upfront payments, milestone payments (other than those deemed contingent consideration in a business combination) and annual maintenance fees under license agreements are expensed in the period in which they are incurred.
Research and development activities are central to our business. We expect that our research and development expenses will increase substantially over the next several years as we continue development of the Nanox System. We expect to continue to devote a substantial portion of our resources to the Nanox.ARC hardware, the Nanox.CLOUD software and our underlying technology for the foreseeable future.
The successful development and commercialization of our products are highly uncertain. At this time, we cannot reasonably estimate or know the nature, timing and costs of the efforts that will be necessary to complete the development of any of our products. This uncertainty is due to the numerous risks and uncertainties associated with product development and commercialization, including the uncertainty of:
|•||the timing and progress of development activities;|
|•||our ability to maintain our current research and development programs and to establish new ones;|
|•||the receipt of regulatory approvals from applicable regulatory authorities without the need for independent clinical trials or validation;|
|•||the timing, receipt and terms of any marketing approvals from applicable regulatory authorities;|
|•||our ability to establish new licensing or collaboration arrangements;|
|•||the performance of our future collaborators, if any;|
|•||establishing commercial manufacturing capabilities or making arrangements with third-party manufacturers;|
|•||obtaining, maintaining, defending and enforcing patent claims and other intellectual property rights;|
|•||launching commercial sales of our products, including the Nanox.ARC hardware and Nanox.CLOUD software, whether alone or in collaboration with others; and|
|•||maintaining a continued acceptable safety profile of the products following approval.|
Any changes in the outcome of any of these variables with respect to the development of our products could result in a significant change in the costs and timing associated with the development of these products. For example, if the FDA or another regulatory authority were to require us to conduct clinical trials or other testing beyond what we currently expect, we could be required to expend significant additional financial resources and time to complete development of our products. We may never obtain regulatory approval for any of our products and third parties may never obtain regulatory approvals for any products containing our technology.
Marketing, General and Administrative Expenses
Marketing expenses consist of public relations and general marketing expenses. General and administrative expenses consist primarily of salaries, related benefits and share-based compensation expense for personnel in executive, finance and administrative functions. General and administrative expenses also include facilities, depreciation and other expenses, which include direct or allocated expenses for rent and maintenance of facilities and insurance, as well as professional fees for legal, patent, consulting, investor and public relations, accounting and audit services.
We anticipate that our marketing, general and administrative expenses will increase as we increase our headcount to support our continued research activities and development of our products. Following the completion of this offering, we also anticipate that we will incur increased accounting, audit, legal, regulatory, compliance, director and officer insurance and investor and public relations costs associated with being a public company.
Results of Operations
Comparison of the years ended December 31, 2019 and 2018
The table below summarizes the results of operations for the years ended December 31, 2019 and 2018, respectively, together with the changes in those items in dollars:
Research and development
General and administrative
Total operating expenses
Financial (income) expenses, net
Research and Development Expenses
The table below summarizes our research and development expenses incurred during the periods presented:
($ in thousands)
Research and Development Expenses:
R&D - salaries and wages
R&D - professional services
Research and development expenses increased by $2.0 million to $2.7 million for the year ended December 31, 2019 from $0.7 million for the year ended December 31, 2018. The increase in research and development expenses was primarily attributable to increases in salaries and wages, share-based compensation and professional services as we continue to expand our research and development activities relating to the Nanox System.
Marketing, General and Administrative Expenses
The table below summarizes our marketing expenses incurred during the periods presented:
Marketing – salaries and wages
Marketing and business development
Marketing expenses increased by $1.35 million to $1.56 million for the year ended December 31, 2019 from $0.21 million for the year ended December 31, 2018. The increase in marketing expenses was primarily attributable to increases in share-based compensation and professional services as we continue to expand our business and to build management infrastructure to move toward the commercial stage of our business.
The table below summarizes our general and administrative expenses incurred during the periods presented: